Parker 4 Way 3 Position Spool Type Solenoid Valve

Parker 4 Way 3 Position Spool Type Solenoid Valve

Parker’s direct acting 4-way, 3-position (4/3) spool-type solenoid valves feature a robust design that ensures reliable and repeatable performance with minimized pressure drop. These valves can operate with hydraulic system flows up to 57 lpm (15 gpm) and pressures as high as 350 bar (5000 psi) with open, closed, float, and tandem center configurations available. Parker’s 4-way, 3-position spool-type solenoid valves also have manual override options and are perfect for double acting cylinders, pilot circuits, and bi-directional motor applications while utilizing an easy to configure and use double-solenoid stack. These valves can be used on a wide range of machinery within the mobile, industrial, or manufacturing markets.

Markets:

  • Aerial
  • Agriculture
  • Construction
  • Material Handling
  • Miscellaneous Industrial
  • Miscellaneous Manufacturing
  • Miscellaneous Mobile

Features/Benefits:

  • Replaceable one-piece coils with low amp draw
  • High flow capacity
  • High pressure capability
  • Manual override options
  • Low hysteresis
  • All external parts zinc plated

Applications:

  • Reversing flow
  • Actuator applications
  • Bi-directional motors
  • Pilot circuits

Additional Technical Insight:

Direct acting spool valves are fast to respond to coil voltage and can quickly re-direct or block flow to actuator ports. Some leakage will be present due to spool clearances.

Specification

Maximum Inlet Pressure Rating: 5000, 3600 psi, 350, 250 bar
Configuration: Closed Center, Floating Center, Tandem Center, Open Center, Pump Unload, port 2 blocked
Flow Rate: 4.5, 4, 3.5, 7, 5, 11, 15 Gal/min, 17, 15, 13.3, 26.5, 18.8, 42, 57 L/min
Maximum Tank Pressure: 3000, N/A psi, 210, N/A bar
Leak Rate: 250 @ 5000 PSI (350 BAR), 500 @ 5000 PSI (350 BAR), 160 @ 3600 PSI (250 BAR), 160 @ 3000 PSI (210 BAR) cm3/min
Cavity Size: C08-4, C10-4, C12-4L
Override Functionality: N/A, Non-Detented, Detented, Push/Pull, Center Detent – Push/Pull, All Detent – Push/Pull
Response Time: 50 ms
Input Voltage: 85% of rated voltage at 72°F (20°C) min
Seal Material: Nitrile, Fluorocarbon, D-Ring (Standard)
Operating Temperature: -30° to +250°, -15° to +400°, -50° to +270° °F, -34° to +121°, -26° to +204°, -45° to +132° °C
Valve Material: All parts steel. All operating parts hardened steel
Maximum Kinematic Viscosity: Mineral-based or synthetic with lubricating properties at viscosities of 45-2000 SSU (6 to 420 cSt) cSt
Filter Efficiency Rating: ISO 4406:1999 Code 18/16/13
Weight: 0.4, 0.64, 0.58, 1 lb, 0.18, 0.29, 0.26, 0.45 kg
Installation Torque: 22, 37-41, 25, 55 lb-ft, 30, 50-56, 34, 74 Nm
Coil Nut Tightening Torque: 3, 5-7 lb-ft, 4.1, 7-10 Nm
Coil Type: 1/2″ Super Coil, 5/8″ Super Coil

Download Datasheet: Parker 4 Way 3 Position Spool Type Solenoid Valve

Advertisements

Be the first to comment