Seametrics PS98i 4-20mA Submersible Pressure Transmitter

The Seametrics PS98i pressure transmitters are rugged and accurate with great noise immunity, transient protection, and thermal performance.These pressure sensors have been designed to provide trouble-free submersible operation in liquid environments. Pressure is measured with an extremely rugged and stable piezo-electric, media isolated pressure element and calibrated with well established calibration procedures and NIST traceable equipment.

The PS98i sensors are thermally compensated, making them great where water temperatures vary, as they are thermally stable (2% over 50 degrees standard).These industry standard, 2-wire, 4-20mA devices offer reverse polarity protection, under- and over-current limitation, and built-in transient protection.

Specification

Housing Weight 0.8 lb. (0.4 kg)
Length 8.44” (21.4 cm)
Diameter 0.75” (1.9 cm)
Body Material Acetal and 316 stainless or optional titanium
Wire Seal Material Fluoropolymer and PTFE
Cable Cable Submersible: Polyurethane, polyethylene, or ETFE available
Desiccant 1-3 mm indicating silica gel
Field Connector Available as an option
Operating Temperature Range Recommended: -5 ̊ to 70 ̊C (23 ̊ to 158 ̊F) Requires freeze protection if using in the water below freezing.
Transmitter Voltage 9-24Vdc (100ms warmup)
Output 4-20mA
Pressure Element Silicon strain gauge transducer, 316 stainless or Hastelloy
Accuracy ±0.25% FSO (static, B.F.S.L. 20 ̊C)
Range Gauge

  • PSI: 1, 5, 15, 30, 50, 100, 300
  • FtH₂O: 2.3, 12, 35, 69, 115, 231, 692
  • mH₂O: 0.7, 3.5, 10.5, 21, 35, 70, 210

Absolute²

  • PSI: 30, 50, 100, 300
  • FtH₂O: 35, 81, 196, 658
  • mH₂O: 10, 24, 59, 200
Compensated 0 ̊ to 50 ̊C (32 ̊ to 122 ̊F)
Max operating pressure 1.1 x FS
Burst pressure 3.0 x FS (for >300 psi (650ft, 200m) contact INW representative)
Regulatory
Advertisements

Be the first to comment