FLOAT TYPE LEVEL TRANSMITTER
Float Level Transmitter
For indicating liquid level and alarming to control.
■ Easy to install and is generally used.
■ Able to control motor continuously.
■ Able to control power seperately.
■ Able to use in chemical, industrial waste water, or food tank.
■ Coated sensor with PVC or PTFE is available for chemical tanks.
■ High temperature type or high viscosity type is available by special order.
- It is widely used for ordering, controlling and alarming the liquid level.
- The installation is quick and easy and is the most widely used water level measuring device.
- By coating the sensor with P.V.C or PTFE, it is possible to use in the chemical tanks used for special purposes.
- It is possible to consecutively control the motors as many as wanted
- It is a widely used water level measuring device for sewage and waste water.
Providing electric voltage of DC 24V to the sensor, it makes output of 4~20mA current which is converted by resistors in the sensor.
The continuous fluctuation of the current is caused by the up-and-down movement of the float which has permanent magnet in it. Finally, the current output is transmitted to the controller.
- Supply Voltage : DC 24V
- Output Voltage : DC 4 ~ 20mA
- Max. Temp : MAX 80℃
- Flange : JIS 10K 100A FF
- Material Stem : SUS304
- Material Float : SUS304
- Material Stopper : SUS304
Recent Posts: Flow meters Wiratama
The Rheonik coriolis meters are primarily Mass Flow Meters and they can measure mass very accurately. These two components are RHM coriolis flow sensors and RHE Coriolis Flow Transmitters
Safety solenoid valves for air and gas from delta elektrogas has many models such as VMM, vmh, vmr, vml, and VMRNA
The VMH type valve is a safety shut off valve for gas with a hydraulic actuator. It is suitable for air or gas blocking and releasing controls, required in the main pipe of gas power burners, atmospheric gas boilers, industrial kilns, and others gas-consuming appliances
SHAKO Pneumatics has dedicated its entire resources to the field of pneumatic products and committed its energies to develop and produce new products
An Air Diaphragm Pumps is a type of positive displacement pump that uses compressed air as a power source.
Air Motors are designed to operate by compressed air. For applications, where positive braking is a requirement, a range of caliper brakes is offered.
An air winch is powered by compressed air instead of electricity. The drive mechanism of the air winch will begin to power the cable drum and effectively raising or lowering the attached load
kalibrasi flow meter dimaksudkan untuk mengembalikan performa flow meter guna mendapatkan faktor ketidak pastian pengukuran, yang merupakan akurasi flow meter dengan flow caliberator dan resetting
Dimensi Flange Ansi#150
Valon pressure sensor products, vpr2, vprv-d, VSW2, VPRT, VDP4, VFM, VPRH, VPMC, Pressure Meter