Advertisements
News Topic

Insertion Electromagnetic Flow Meters

Insertion electromagnetic flowmeters are designed
for use with conductive liquids in 1 to 48″” pipe. A choice of
materials (stainless steel, brass, and PVC) allows the meter
to adapt to a range of temperature, pressure, and corrosive
environments.
The EX series Insertion Magnetic Flow meter highly suitable for difficult applications with
changing viscosities and pulsating flows, such as air-driven
diaphragm pumps. With no moving parts, these meters can
be used in “dirty water” applications where debris would foul a
mechanical meter. Like all magmeters, when used in chemical
injection applications, these meters should be installed upstream
of the chemical line (or far enough downstream to allow complete
mixing of fluids before the meter).
Designed for modularity and versatility, the EX Series has
a current-sinking pulse output that can be combined with the
appropriate transmitter or indicator for the application.
For basic
rate/total and pulse output, the FT430 is best. For analog output
and display of rate and total, the FT440 can be used. Blind
analog output is provided by the AO55. The PD10 can be used to
divide the pulse for pacing chemical metering pumps. Electronic
modules can be wall- or meter- mounted. If the EX meter is
used with a programmable controller, the output signal can be
fed direct, with no other conditioning required.
EX-Series fi xed depth insertion meters require special fittings.
Factory installation in the fi tting ensures correct depth placement
in the pipe.
The EX-Series meter can be ordered in a full
power model when a source of electricity is available, or in a low
power model that can run on an external battery with solar panel.
Reverse fl ow output and immersibility are optional

There are three types of  Insertion Magnetic Flow meter



EX800-Series insertion electromagnetic flowmeters are designed
for use with conductive liquids in 1 to 12” pipe. A choice of
materials (stainless steel, brass, and PVC) allows the meter
to adapt to a range of temperature, pressure, and corrosive
environments.
The EX800 is highly suitable for difficult applications with
changing viscosities and pulsating fl ows, such as air-driven
diaphragm pumps. With no moving parts, these meters can
be used in “dirty water” applications where debris would foul a
mechanical meter. Like all magmeters, when used in chemical
injection applications, these meters should be installed upstream
of the chemical line (or far enough do


The EX100 Series are adjustable depth insertion magmeters
that fi t 3” to 48” pipe (up to 72” optional). The complete
lack of moving parts of the EX100-Series is the source
of its reliability. Brass and stainless steel models withstand a
variety of temperature, pressure, and chemical conditions. The
EX-Series has no rotor to stop turning in dirty water and there
are no bearings to wear out. Like all magmeters, when used in
chemical injection applications, these meters should be installed
upstream of the chemical line (or far enough downstream to allow
complete mixing of fl uids before the meter). Adapters mate
with standard 1-1/2” (11x/21x) or 2” (15x/25x) FNPT threaded
fi ttings such as saddles and weldolets which may be purchased
either locally or from Seametrics.

The EX200-Series are adjustable depth insertion magmeters
that fi t 3” to 48” pipe (up to 72” optional). The complete
lack of moving parts of the EX200-Series is the source
of its reliability. Brass and stainless steel models withstand a
variety of temperature, pressure, and chemical conditions. The
EX-Series has no rotor to stop turning in dirty water and there
are no bearings to wear out. Like all magmeters, when used in
chemical injection applications, these meters should be installed
upstream of the chemical line (or far enough downstream to allow
complete mixing of fl uids before the meter). Adapters mate
with standard 1-1/2” (11x/21x) or 2” (15x/25x) FNPT threaded
fi ttings such as saddles and weldolets which may be purchased
either locally or from Seametrics. rudy

Advertisements

Article Flowmasonic: Rudy flow meter Wiratama

Flow Meter Air Baku PDAM

Flow meter air baku pdam adalah flow meter yang digunakan untuk mengukur debit air dan total volume air baku yang akan di proses guna menghasilkan kwalitas air sesuai standart pdam. Air baku pdam bisanya dimabil dari sungai, bendungan, waduk atau sumur bor dan untuk daerah tertentu mungkin mengambil dari air laut yang di proses menjadi […]

Thermal Mass Compress air and gas flow meters VA500

Flow sensor for compressed air and gas – VA 500 Contrary to the previously used bridge circuit the newly developed evaluation electronics of our flow sensor records all measured values digitally. This leads to a better accuracy also in case of large measuring spans of 1:1000. What are the advantages of our flow measuring technology? […]

Flow meters for compressed air and gas

Fow meters from CS Instruments work according to the calorimetric measuring principle. This means, while measuring the thermal mass flow or standard volume flow, no additional temperature and pressure compensation is necessary. The standard volume is a common volumetric unit used to compare gas quantities at different pressures and temperatures. In order to meet various […]

Batch Controller N series fluidwell

The product group “Batch Controllers” offers multiple batch controllers in the N-Series, F-Series and D-Series product ranges. The batch controllers can be used for accurate dispensing of small amounts of liquids up to the loading of trucks with two-stage control and analog multi-stage control. Specially designed for the delivery of unknown quantities of product is […]

Flow Computers fluidwell

The product group “Flow Computers” offers a unique range of comprehensive solutions to calculate the consumption and net flow at standard conditions or the ratio between two flows. Typical applications are found on board of ships to calculate the fuel consumption, gas flow calculation in power plants and the monitoring of two component blending. The […]

 

Ada yang ingin ditanyakan silahkan

1. Jika ada Pertanyaan tentang Product ataupun harga silahkan langsung hubungi :

2.  Jika ada pertanyaan atau diskusi Tentang tulisan disini silahkan email ke :            admin@rudywinoto.com

  Atau silahkan isi kolom dibawah ini dan klik submit      

  Flowmagflowmasonic          
%d bloggers like this: