P16 SERIES hydraulic pump


Cast iron pumping sections for durability
Aluminum body and flange for excellent power to weight ratio
Journal bearings for long life and good over-hung load capacity
Buna-N seals are standard for petrolium & glycol based fluids – “Viton®” seals are optional
Preasuse balanced plates for greater efficiency
Available Configurations
P16 – Standard
TP16 – Tandem, 2 and 3 Place
PVP16 – Priority Vavle
CP16 – Clutch Pump, “V” Belt and Serpintine
TP-PVP – Combination P16 with Priority Vavle
PB16-P12 – Piggy Back
HP16 – High Preasure
THP16 – Tandem High Preasure
FPR16 – Cast Iron, Bi-directional
P16, TP16, PVP16, CP16, TP16-PVP16 Models
Fluid displacements to 3.9 cir (63.9 ccr)
Preasures to 3000 psi (206 bar)
Flow range to 38 gpm (143.8 lpm) per section,  the TP16 is 32 gpm (121 lpm)
Prioity Flow range 2 to 10 gpm (7.5-37.8 lpm) standard (PVP16 only)
PB16-P12 Model
Flow ranges
Front pump to 42 gpm (158.9 lpm)
Rear pump to 42 gpm (158.9 lpm)

Rear pump to 0.90 cir (14.3 ccr)
Front pump to 3000 psi (206 bar)
Rear pump to 2500 psi (172 bar)
HP16 & THP16 Models
Displacements to 4.8 cir (79.8 ccr)
Preasures to 3100 psi (213 bar)
Flow range to 46 gpm (174 lpm) per section THP16 – 42 (158.9 lpm) per section
FPR16 Model
Displacements to 3.902 cir (63.9 ccr)
Preasures to 3000 psi (206 bar)
Flow range to 42 gpm (159 lpm) per section
All cast iron construction

Product Category Selection