P16 SERIES hydraulic pump

Hydraulic Pump P16 SERIES

Construction

  • Cast iron pumping sections for durability
  • Aluminum body and flange for excellent power to weight ratio
  • Journal bearings for long life and good over-hung load capacity
  • Buna-N seals are standard for petroleum & glycol-based fluids – “Viton®” seals are optional
  • Pressure balanced plates for greater efficiency

Available Configurations

  • P16 – Standard
  • TP16 – Tandem, 2 and 3 Place
  • PVP16 – Priority Valve
  • CP16 – Clutch Pump, “V” Belt and Serpentine
  • TP-PVP – Combination P16 with Priority Valve
  • PB16-P12 – Piggy Back
  • HP16 – High Pressure
  • THP16 – Tandem High Pressure
  • FPR16 – Cast Iron, Bi-directional

P16, TP16, PVP16, CP16, TP16-PVP16 Models

  • Fluid displacements to 3.9 cir (63.9 ccr)
  • Pressures to 3000 psi (206 bar)
  • Flow range
    •  38 GPM (143.8 LPM) per section,
    • the TP16 is 32 GPM (121 LPM)
  • Priority Flow range 2 to 10 GPM (7.5-37.8 LPM)
  • standard (PVP16 only)

PB16-P12 Model

Flow ranges

  • Front pump to 42 GPM (158.9 LPM)
  • Rear pump to 42 GPM (158.9 LPM)

Displacements

  • Rear pump to 0.90 cir (14.3 ccr)

Pressures

  • Front pump to 3000 psi (206 bar)
  • Rear pump to 2500 psi (172 bar)

HP16 & THP16 Models

  • Displacements to 4.8 cir (79.8 ccr)
  • Pressures to 3100 psi (213 bar)
  • Flow range to
    • 46 GPM (174 LPM) per section
    • THP16 – 42 (158.9 LPM) per section

FPR16 Model

  • Displacements to 3.902 cir (63.9 ccr)
  • Pressures to 3000 psi (206 bar)
  • Flow range to 42 GPM (159 LPM) per section
  • All cast iron construction

Product Category Selection

Product Photo
P16 ASSEMBLED UNITS

 

 

Advertisements