Advertisements
News Topic

Insertion Electromagnetic Flow Meters

Insertion electromagnetic flowmeters are designed
for use with conductive liquids in 1 to 48″” pipe. A choice of
materials (stainless steel, brass, and PVC) allows the meter
to adapt to a range of temperature, pressure, and corrosive
environments.
The EX series Insertion Magnetic Flow meter highly suitable for difficult applications with
changing viscosities and pulsating flows, such as air-driven
diaphragm pumps. With no moving parts, these meters can
be used in “dirty water” applications where debris would foul a
mechanical meter. Like all magmeters, when used in chemical
injection applications, these meters should be installed upstream
of the chemical line (or far enough downstream to allow complete
mixing of fluids before the meter).
Designed for modularity and versatility, the EX Series has
a current-sinking pulse output that can be combined with the
appropriate transmitter or indicator for the application.
For basic
rate/total and pulse output, the FT430 is best. For analog output
and display of rate and total, the FT440 can be used. Blind
analog output is provided by the AO55. The PD10 can be used to
divide the pulse for pacing chemical metering pumps. Electronic
modules can be wall- or meter- mounted. If the EX meter is
used with a programmable controller, the output signal can be
fed direct, with no other conditioning required.
EX-Series fi xed depth insertion meters require special fittings.
Factory installation in the fi tting ensures correct depth placement
in the pipe.
The EX-Series meter can be ordered in a full
power model when a source of electricity is available, or in a low
power model that can run on an external battery with solar panel.
Reverse fl ow output and immersibility are optional

There are three types of  Insertion Magnetic Flow meter



EX800-Series insertion electromagnetic flowmeters are designed
for use with conductive liquids in 1 to 12” pipe. A choice of
materials (stainless steel, brass, and PVC) allows the meter
to adapt to a range of temperature, pressure, and corrosive
environments.
The EX800 is highly suitable for difficult applications with
changing viscosities and pulsating fl ows, such as air-driven
diaphragm pumps. With no moving parts, these meters can
be used in “dirty water” applications where debris would foul a
mechanical meter. Like all magmeters, when used in chemical
injection applications, these meters should be installed upstream
of the chemical line (or far enough do


The EX100 Series are adjustable depth insertion magmeters
that fi t 3” to 48” pipe (up to 72” optional). The complete
lack of moving parts of the EX100-Series is the source
of its reliability. Brass and stainless steel models withstand a
variety of temperature, pressure, and chemical conditions. The
EX-Series has no rotor to stop turning in dirty water and there
are no bearings to wear out. Like all magmeters, when used in
chemical injection applications, these meters should be installed
upstream of the chemical line (or far enough downstream to allow
complete mixing of fl uids before the meter). Adapters mate
with standard 1-1/2” (11x/21x) or 2” (15x/25x) FNPT threaded
fi ttings such as saddles and weldolets which may be purchased
either locally or from Seametrics.

The EX200-Series are adjustable depth insertion magmeters
that fi t 3” to 48” pipe (up to 72” optional). The complete
lack of moving parts of the EX200-Series is the source
of its reliability. Brass and stainless steel models withstand a
variety of temperature, pressure, and chemical conditions. The
EX-Series has no rotor to stop turning in dirty water and there
are no bearings to wear out. Like all magmeters, when used in
chemical injection applications, these meters should be installed
upstream of the chemical line (or far enough downstream to allow
complete mixing of fl uids before the meter). Adapters mate
with standard 1-1/2” (11x/21x) or 2” (15x/25x) FNPT threaded
fi ttings such as saddles and weldolets which may be purchased
either locally or from Seametrics. rudy

Advertisements

Article Flowmasonic: Flow meters Wiratama

Jenis dan model flowmeter magnetic

Jenis flow meter magnetic Flowmeter magnetic diproduksi dan digunakan hanya untuk mendeteksi aliran yang mempunyai dasar ciran yang mempunyai koduktivitas minimal 20 micro siemens. Sensua dengan aplikasinya jenis flowmeter magnetic dapat di golongkan berdasarkan cara installasinya yaitu In Line flow meter magnetic Insertion magnetic flow meter In Line flow meter magnetic In Line magnetic flow meter […]

Komponen flow meter magnetic

Flow sensor magnetic Ada dua komponen flowmeter magnetic yang utama yaitu magnetic flow sensor dan magnetic flow transmitter atau converter magnetic. Untuk flow sensor magnetic terdapat beberapa komponan sesuai dengan jenis dan model flow meternya dan biasanya ini yang menjadi acuan size flow meter dengan koneksi disesuaikan kondisi lapangan apakah menggunakan flange, ulir atau lainya. […]

Kelebihan dan cara instalasi flowmeter magnetic

Kelebihan dan kekurangan flow meter magnetic Karena cara kerja Flow meter electromagnetic dalam mengukur besarnya flow rate berdasarkan luasan penampang maka pressure  aliran tidak akan berkurang , dan karena tidak adanya bagian sensor yang menghalangi atau berputar membuat sensor mempunyai umur yang relatif lebih lama dan free maintenance. Salah satu kelebihan dari magnetic flow meter […]

Flow meter magnetic

Flow meter magnetic atau magnetic flowmeter  dan sering disebut dengan nama magmeter merupakan jenis flowmeter volumetric yang cara kerjanya menggunakan sensor electromagetic berupa electroda. Karena menggunakan sensor elektromagnetic maka flowmeter magnetic ini tidak ada bagian yang bergerak (moving part) dan cocok untuk diaplikasi pada air kotor, air limbah dan air kotor bahkan untuk slurry asalkan cairanya […]

Flow meter portable untuk liquid

Flow meter portable untuk liquid merupakan flow meter yang digunakan untuk mengetahui besarnya aliran air atau debit air dalam pipa yang pengoprasianya mudah dan bisa dibawa ke mana mana karena ringkas dan ringan. Flow meter portable mulai terkenal saat dikenalkanya penggunaan ultrasonic pada aplikasi  flow meter dan dikenal dengan nama portabel ultrasonic flow meter,   dimana […]

 

Ada yang ingin ditanyakan silahkan

1. Jika ada Pertanyaan tentang Product ataupun harga silahkan langsung hubungi :

2.  Jika ada pertanyaan atau diskusi Tentang tulisan disini silahkan email ke :            admin@rudywinoto.com

  Atau silahkan isi kolom dibawah ini dan klik submit      

  Flowmagflowmasonic          
%d bloggers like this: