Seametrics Single Jet Low Flow Meter SPT & SPX Series

Teflon Flow Meter (SPT)  | Polypropylen Flow Meter (SPX) | Low Flow Meter

Single Jet Low Flow Meter, Woltman Flow Meter

These versatile impeller flowmeters are available in 3/8”, 1/2”, 3/4”, and 1” nominal pipe sizes with female NPT threads. They employ jewel bearings to allow for very low minimum flow rates and superior life.

The SPX, with a body of polypropylene, is an economical choice for metering water or low corrosion fluids. The lens cover is available in a choice of materials: acrylic for visual flow indication of low-corrosion fluids; polypropylene when more corrosion resistance is needed. The standard rotor assembly is Kynar® with a tungsten carbide shaft. The O-ring is EPDM.

The SPT offers greater chemical resistance with a Teflon® body and cover, Teflon®-coated Viton® O-ring, and standard Kynar®/ceramic rotor assembly. The pulse output of these meters is compatible with many different types of controls, including a full range of Seametrics rate displays and controls.

The Seametrics FT430 and FT440 provide flow rate and total flow indication. The FT440 also includes 4-20 mA output capability. The FT450 is a battery-operated rate & total display. For metering pump pacing or interfacing with low-speed counters, the PD10 pulse divider is recommended. The AO55 may be used for blind 4-20 mA transmission

Features

  • Low flow, chemical resistant flow meter in sizes 3/8″ to 1″
  • Versatile square-wave signal connects to PLC’s, counters, and Seametrics controls
  • Only one moving part
  • Sight flow indication
  • Replaceable non-wetted solid-state pickup
  • Wide flow range

Baca juga: Seametrics SES-Single Jet Low Flow Meter

Applications

  • Low flow monitoring
  • Chemical batching
  • Proportional chemical injection
  • Fertilizer injection

Specifications

Item

SPT

SPX

Connection Ports 3/8”, 1/2”, 3/4”, 1” —Female NPT thread 3/8”, 1/2”, 3/4”, 1” —Female NPT thread
Sensor Cable 18 ft (6 m) standard—maximum cable run 2000 ft (607 m) 18 ft (6 m) standard—maximum cable run 2000 ft (607 m)
Materials Body Polypropylene TFE Teflon®
Rotor PVDF (Kynar®)—2 magnet(6 magnets high resolution optional PVDF (Kynar®)—2 magnet(6 magnets high resolution optional
Shaft Nickel tungsten carbide(ceramic or silicon carbide optional) Zirconia ceramic(silicon carbide optional
O-Ring EDPM (Viton® or Teflon®-coated Viton® optional) Teflon®-coated Viton®(Viton® or EDPM optional)
Bearings Ruby ring and ball Ruby ring and ball
Cover Acrylic with clear lens ( polypropylene without clear lens optional TFE Teflon®
Maximum Temperature 160 ̊ F (70 ̊ C) 180 ̊ F (82 ̊ C)
Maximum Pressure 150 psi (10 bar) 150 psi (10 bar)
Accuracy ±1% of a full scale ±1% of a full scale
Power Standard 6–36 Vdc, 2 mA min. 6–36 Vdc, 2 mA min.
Micropower 3.1–16 Vdc (for use with FT450 and DL76 only) 3.1–16 Vdc (for use with FT450 and DL76 only)
Outputs Current sinking pulse, 6–24 Vdc Current sinking pulse, 6–24 Vdc

Dimensions

Seametrics SPT & SPX Dimension

Visit Wmablog for more info 

 

  Another Article:

 

Advertisements