Advertisements

TDS-100H Portable Flow Meters

Hand Held Flow Meter
Portable Flow Meter

The TDS-100H ultrasonic flow meter is designed to measure the fluid velocity of liquid within a closed conduit.  The transducers are a non-contacting, clamp-on type, which will provide benefits of non-fouling operation and easy installation. The TDS-100H transit time flow meter utilizes two  transducers that function as both ultrasonic transmitters and receivers. The transducers are clamped on the outside of a closed pipe at a specific distance from each other.  The transducers can be mounted in V-method where the sound transverses the pipe twice, or W-method where the sound transverses the pipe four times, or in Z-method where the transducers are mounted on opposite sides of the pipe and the sound crosses the pipe once.  This selection of the mounting method depends on pipe and liquid characteristics.  The flow meter operates by alternately transmitting and receiving a frequency modulated burst of sound energy between the two transducers and measuring the transit time that it takes for sound to travel between the two transducers.  The difference in the transit time measured is directly and exactly related to the velocity of the liquid in the pipe. The TDS-100H can be used for Carbon steel, Stainless steel, copper, PVC, Rubber tubes, etc

TDS series Hand held Ultrasonic Flow Meters are based on clamp-on transit-time flow measurement principle. It measures the flow rate of liquid in a pipe from outside of the pipe by using a pair of ultrasonic transducers. In general, the liquid should be full in the pipe, and should contain very little particles or bubbles. It is applicable for water (hot water, chill water, city water, sea water, etc.); sewage; oil (crude oil, lubricating oil, diesel oil, fuel oil, etc.); chemicals (alcohol, acids, etc.); waste; beverage and liquid food, solvents and other liquids.TDS-100H handheld ultrasonic flow meter is a battery-powered ultrasonic flow meter with the capability of a full-size flow meter. It is carefully designed for portability and ease of use.

Technical Specification:
Linearity : 0.5%
Repeatability : 0.2%
Accuracy : ±1% of reading at rates>0.2 mps
Response Time : 0-999 seconds, user-configurable
Velocity : ±32 m/s
Pipe Size : 20mm-6000mm
Rate Units : Meter, Feet, Cubic Meter, Liter, Cubic Feet, USA Gallon, Imperial Gallon, Oil Barrel, USA Liquid Barrel, Imperial Liquid Barrel, Million USA Gallons. User configurable.
Totalizer : 7-digit totals for net, positive and negative flow respectively
Liquid Types : Virtually all liquids
Security : Setup values Modification Lockout. Access code needs unlocking
Display : 4×16 English letters
Communication Interface : RS-232C, baud-rate: from 75 to 57600. Protocol made by the manufacturer and  compatible with that of the FUJI ultrasonic flow meter. User protocols can be made on enquiry.
Transducers : Model M1 for standard, other 3 models for optional
Transducer Cord Length : Standard 2×10 meters, optional 2x 500 meters
Power Supply : 3 AAA Ni-H built-in batteries. When fully recharged it will last over 10 hours of operation.100V-240VAC for the charger
Data Logger : Built-in data logger can store over 2000 lines of data
Manual Totalizer : 7-digit press-key-to-go totalizer for calibration
Housing Material : ABS
Case Size : 100x66x20mm
Handset Weight : 514g (1.2 lbs) with batteries

 

Advertisements

Recent Posts: Flow meters Wiratama

Elektrogas Automatic Safety Solenoid Valves

Safety solenoid valves for air and gas from delta elektrogas has many models such as VMM, vmh, vmr, vml, and VMRNA

VMH Elektrogas Safety shut off valves for gas

The VMH type valve is a safety shut off valve for gas with a hydraulic actuator. It is suitable for air or gas blocking and releasing controls, required in the main pipe of gas power burners, atmospheric gas boilers, industrial kilns, and others gas-consuming appliances

Solenoid Valve Shako Pneumatics

SHAKO Pneumatics has dedicated its entire resources to the field of pneumatic products and committed its energies to develop and produce new products

Air Diaphragm Pumps

An Air Diaphragm Pumps is a type of positive displacement pump that uses compressed air as a power source.

Vane Air Motors and Air Gear Motors Tonson

Air Motors are designed to operate by compressed air. For applications, where positive braking is a requirement, a range of caliper brakes is offered.

Air Winches for lifting and pulling in Hazardous Area

An air winch is powered by compressed air instead of electricity. The drive mechanism of the air winch will begin to power the cable drum and effectively raising or lowering the attached load

Perlunya Resetting dan Kalibrasi Flow meter secara berkala

kalibrasi flow meter dimaksudkan untuk mengembalikan performa flow meter guna mendapatkan faktor ketidak pastian pengukuran, yang merupakan akurasi flow meter dengan flow caliberator dan resetting

Dimensi Flange ANSI

Dimensi Flange Ansi#150

VALCOM – PRESSURE SENSOR

Valon pressure sensor products, vpr2, vprv-d, VSW2, VPRT, VDP4, VFM, VPRH, VPMC, Pressure Meter

Showa Giken Pearl Rotary Joint and Swivel Joint

Showa Giken Pearl Rotary Joints and Swivel joint are used for supplying/discharging compressed or decompressed fluid/gas from a fixed piping to the rotary section of various machines with no leak

 

Ada yang ingin ditanyakan silahkan :

1. Jika ada Pertanyaan tentang Product ataupun harga silahkan langsung hubungi :

 .

2.  Jika ada pertanyaan atau diskusi Tentang tulisan ini silahkan email ke admin@rudywinoto.com

.

Atau silahkan isi kolom dibawah ini dan klik submit  

.  

 
About Rudy Wiratama (979 Articles)
rudywinoto.com/wmablog.com/flowmasonic.com
%d bloggers like this: