Fox Thermal Flow Meter
Thermal Mass Flow Meter
Inline Flow Meter
Insertion Flow Meter
The Model FT1 is a multiple award winner due to its innovative design elements such as the DDC-Sensor™ technology platform that allows it to operate using the Gas-SelectX® gas menu selection tool.
- Insertion & Inline Styles
- DDC-Sensor™ Technology
- Gas-SelectX® Gas Selection Menu
- Zero CAL-CHECK® Calibration Validation
- Scroll down for more features/benefits!
- Wastewater Aeration
- Natural Gas Monitoring
- Pure Gas Monitoring
- Biogas Monitoring
|Flow Accuracy:||Air: ± 1% of reading ± 0.2% of full scale.
Other Gases: ± 1.5% of reading ± 0.5% of full scale.
Accuracy specification applies to customer’s selected flow range
|Straight, unobstructed pipe requirement:||15 diameters upstream; 10 downstream.||8 diameters upstream; 4 downstream.|
|Flow Repeatability:||± 0.2% of full scale|
|Flow Response Time:||0.8 seconds (one time constant)|
|Temperature Accuracy:||± 1° F (± 0.6° C)|
|Calibration:||Factory Calibration to NIST-traceable standards
Zero CAL-CHECK®: In situ, operator-initiated calibration validation
|Flow Units (field selectable):||SCFM, SCFH, NMPS, NM3/M, NM3/H, NM3/D, NLPS, NLPM, NLPH, MCFD, MSCFD, SCFD, MMSCFD, MMSCFM, SM3/M, SM3/D, SM3/H, LB/S, LB/M, LB/H, LB/D, Kg/S, Kg/M, Kg/Hr, SLPM, SFPM, MT/H
|Flow Rates:||15 to 25,000 SFPM (0.07 to 120 NMPS)
|Turndown:||up to 1000:1; 100:1 typical|
Note: To determine if the FT4A will operate accurately in other pipe sizes, divide maximum flow rate by the pipe area. The application is acceptable if the resulting velocity is within the velocity range above.
Note: Consult factory for flow ranges above those listed. Inline meters above 5,000 SCFM (7,900 NM3/H) air may require third party calibration.
|Gas Pressure (max):||740 psig (51 barg)||316 SS inline w/NPT ends: 300 psig (20 barg)
316 SS inline w/150lb flanges: 230 psig (16 barg)
CS inline w/NPT ends: 300 psig (20 barg)
CS inline w/150lb flanges: 285 psig (20 barg)
|Check with factory for higher pressure options.
NOTE: When teflon ferrule option ordered, gas pressure is 60psig (4.1 barg) maximum.
|Relative Humidity:||90% RH maximum; non-condensing|
|Temperature:||DDC-Sensor™: -40 to 250°F (-40 to 121°C)
Enclosure: -40 to 158°F (-40 to 70°C)
*Note: Display dims below -4°F (-20°C); function returns once temperature rises again.
|Input Power:||Input power: 12 to 28VDC, 6 watts max. (CE requirement)
Full input power input range: 10 to 30VDC, 6 watts maximum.
Mini USB communication port is standard.
The free PC-based software tool – FT1 View™ – provides complete configuration, remote process monitoring, and data logging functions.
|Optional serial communication:||
Modbus RTU (RS485), BACnet MS/TP (RS485) or HART (when no pulse output has been ordered).
|4-20mA and Pulse Verification:||
Simulation mode used to align 4-20mA output and pulse output (if ordered) with the input to customer’s PLC/DCS.
|Sensor Material:||316 stainless steel standard.
|Enclosure:||NEMA 4, Aluminum, dual conduit entries with ¾” FNPT.|
|Retractor Assemblies:||150 psig (10.3 barg) max.||N/A|
Fox Thermal-supplied compression fitting connects to customer-supplied 1″ female coupling welded to pipe.
Compression fitting included with flow body.