Fcon 1000 Series Analog Mass Flow Controller

Fcon Analog mass flow meter 1000 Series WWIth PA01PS Control Power Supply

Feature

  • It is an analog model specializing the basic functions of the mass flow controller.
  • Improved performance and reliability by basic functions pursuing original technology.
  • Two type of Control Power Supply, Floor-standing “PA01” and Panel Mount “PA01P”.
  • Compact size.
  • The suppression of Flow surge (overshoot) at the start (Requires more than 30 seconds of interval).
  • Input & Output Signal : Analog (0~5VDC)
  • To control the mass flow controller, a control power supply and a signal cable are required.

Spesification

Mass Flow Controller C1005 C1020 C1030/C1050 C1100
Mass Flow Meter M1005 M1020 M1030/M1050
Flow range (N2equivalent) 10,20,30,50,100,200,300,500SCCM
1,2,3,5SLM
10,20SLM 30,50SLM 100LM
Gases Various Gases (Please consult about corrosive gas) Air, N2, Ar, H2, CO2, O2, He Air, N2
Valve type NC : Normally Close (Excluding Mass Flow Meter)
Flow rate control range 5-100% F.S (Excluding Mass Flow Meter)
Accuracy ±2% F.S (Accuracy guaranteed between 15-35℃)
Setting signal 0.25-5VDC (excluding Mass Flow Meter)
Output signal 0-5VDC
Repeatability ±0.2% F.S ±0.5% F.S
Response ≦6sec ≦15sec
Operating differential pressure 50-300KPa 200-300KPa
Pressure resistance 1MPa(G)
Operating temperature 5-50℃, ≦85%RH (Scope of accuracy guarantee : 15-35℃)
Leak integrity 1×10-7Pa・m3/sec He
Mounting attitude Free
Drive power source +15VDC:60mA、-15VDC:150mA
Communication Analog : 0-5VDC
Wetted surface material SUS316, PTFE, Fluoro-Rubber
Seal material Fluoro-Rubber
Actuator system Thermal (excluding Mass Flow Meter)
Surface treatment Machined finish
Standard fitting 1/4in.SWL (equivalent), One-touch fittings,  ※ For other fitting, please contact us.

 

Another Article:

Dimension

1000 series dimensions

Order Code

how to order Fcon Analog mass flow meter 1000 Series

 

Reference : http://www.fcon-inc.jp