Advertisements

Ultrasonic water meters FLOMIC FL5024 and FL5044

Ultrasonic water meters FLOMIC FL5024 and FL5044

The battery-powered FLOMIC FL5024 and FLOMIC FL5044 ultrasonic water meters are intended for operational and invoicing measurements of instantaneous flow rate, pressure and consumption in water piping in observance of standard EN 14154 in waterworks, water distribution systems and other industrial applications.

These water meters are of a compact design with the IP 68 protection class. They are characterized by high measurement accuracy and long-term stability over a wide range of measured values. The meters do not need any external power supply, do not include any moving parts and, have significantly lower hydraulic losses.

The technical parameters and other features of the FLOMIC water meters make them suitable not only for water consumption measurements but also for water-leak tracking and monitoring of the general condition of water-supply networks, where the meter output signals can be connected via data transfer systems to remote computer control stations.

The measurement method utilized by these meters is a single-beam (FL5024) or dual-beam (FL5044) transit-time pulse method based on the evaluation of the time needed for an ultrasonic signal to cross the distance between two measuring transductors. In the standard version, the meter measures instantaneous flow rate (in m3/hour) and the total volume of water passed through the meter (in m3) in the given flow direction. The measured data are converted into passive pulse output signals.

OPTIONAL METER ACCESSORIES:

  • The bi-directional flow rate and volume measurements with visual and electronic indication of the actual flow rate direction
  • Measurement and display of instantaneous water pressure values within the range of 1 to 16 bar
  • Using a passive current output signal 4 to 20 mA, monitoring the instantaneous flow rate or flow pressure values
  • Measured data storage with a user-selectable sampling period of 1 minute to 1 year
  • Actual and stored data reading via the USB or RS 232 interface
  • Connection to a remote data transfer system by means of a GSM module
  • Use of alternative measurement units (Gal/min, or liter/sec)
  • Application of the meter within drinking-water supply systems
  • Power supply via the 4 to 20 mA current line

 

Technical parameters

usage measurement of the total volume of the water passed through and instantaneous flow rate and pressure
the principle of the measurement transit-time
type – one beam (1B – FL5024) or dual beam  (2B – FL5044)
– compact version
the range of dimension DN32 to DN200
a temperature of a measured fluid to 50°C
pressure up to 1.6 MPa
flow sampling period 1 sec
electrical outputs pulse and current
interface an optical probe, RS 232, GSM module
data storage data archive
power source Li battery 3.6V, 16Ah, lifetime 6 to 8 years
protection class IP68
Advertisements

Recent Posts: Flow meters Wiratama

Rheonik Coriolis Mass Flow Meters

The Rheonik coriolis meters are primarily Mass Flow Meters and they can measure mass very accurately. These two components are RHM coriolis flow sensors and RHE Coriolis Flow Transmitters

Elektrogas Automatic Safety Solenoid Valves

Safety solenoid valves for air and gas from delta elektrogas has many models such as VMM, vmh, vmr, vml, and VMRNA

VMH Elektrogas Safety shut off valves for gas

The VMH type valve is a safety shut off valve for gas with a hydraulic actuator. It is suitable for air or gas blocking and releasing controls, required in the main pipe of gas power burners, atmospheric gas boilers, industrial kilns, and others gas-consuming appliances

Solenoid Valve Shako Pneumatics

SHAKO Pneumatics has dedicated its entire resources to the field of pneumatic products and committed its energies to develop and produce new products

Air Diaphragm Pumps

An Air Diaphragm Pumps is a type of positive displacement pump that uses compressed air as a power source.

Vane Air Motors and Air Gear Motors Tonson

Air Motors are designed to operate by compressed air. For applications, where positive braking is a requirement, a range of caliper brakes is offered.

Air Winches for lifting and pulling in Hazardous Area

An air winch is powered by compressed air instead of electricity. The drive mechanism of the air winch will begin to power the cable drum and effectively raising or lowering the attached load

Perlunya Resetting dan Kalibrasi Flow meter secara berkala

kalibrasi flow meter dimaksudkan untuk mengembalikan performa flow meter guna mendapatkan faktor ketidak pastian pengukuran, yang merupakan akurasi flow meter dengan flow caliberator dan resetting

Dimensi Flange ANSI

Dimensi Flange Ansi#150

VALCOM – PRESSURE SENSOR

Valon pressure sensor products, vpr2, vprv-d, VSW2, VPRT, VDP4, VFM, VPRH, VPMC, Pressure Meter

 

Ada yang ingin ditanyakan silahkan :

1. Jika ada Pertanyaan tentang Product ataupun harga silahkan langsung hubungi :

 .

2.  Jika ada pertanyaan atau diskusi Tentang tulisan ini silahkan email ke admin@rudywinoto.com

.

Atau silahkan isi kolom dibawah ini dan klik submit  

.  

 
About Rudy Wiratama (980 Articles)
rudywinoto.com/wmablog.com/flowmasonic.com
%d bloggers like this: