Flux Flow Meter

FLUX flow meters constructed on the nutating disc principle (FMC), oval rotor (FMO) or the turbine principle (FMT), provide the right solution for every application. Depending on model and overall size they can be used on e.g. FLUX drum pumps or stationary e.g. in pipe lines.

Using the digital display unit FLUXTRONIC® for FMC and FMO filling and metering processes can be carried out for virtually all liquids with maximum precision and the greatest possible safety. In automatic mode there is the possibility of transmitting signals for control purposes. In this way differing processes can be regulated.

 

there some product of FLUX :

FLUX FMC/FMJ Series

For low-viscosity, also slightly soiled

Nutating disc meter for mobile use with FLUX drum and container pumps (FMC 100) or stationary in plant engineering (FMC 250) for liquids up to max. 2500 cPs.

Flux FMC 100

Flux FMC 250

Flux FMJ 100

 

FLUX FMO Series

For pure fluids incl. high-viscosity liquids

The flow meter constructed on the oval rotor principle is designed for the stationary use in pipe lines and mobile use with FLUX drum pumps and eccentric worm-drive pumps.

FLUX FMT Series

For pure low-viscosity fluids

The FLUX flow meter FMT 50 PP works on the turbine principle and is a cost-efficient alternative to our flow meters FMO and FMC/FMJ. The FMT 50 is easy to operate and makes a fast and safe filling of liquids possible.

FLUXTRONIC­­®

Modern Evaluation Unit

With the evaluation unit FLUXTRONIC® for FMC/FMJ and FMO filling and dosing processes of almost all kinds of fluids can be performed with maximum precision and highest safety.  There are two operating option. While in “normal mode” only the passed through volume is displayed in “automatic mode” it is possible to fill preprogrammed quantities semi-automatically at the push of a button. As soon as the requested quantity is filled it is possible to output two signals. This way, e.g. a valve or a drive motor can be controlled or the signal is forwarded to a PLC.

Advertisements