Advertisements
News Topic

Clamp On Ultrasonic Flow Meter

Clamp-on flow meter is a flow meter that is very cheap and easy installation, because it does not have to damage the pipe designed for applications where production should not be stopped, because the installation of flow meters is done with puncture, cut and weld pipe. It is ideal for process measurement in applications where users previously had not installed an in-line flow meter and for applications where large line sizes or exotic materials are required for in-line measurement technologies. 

 


Clamp on Ultrasonic flow meter use Transducers that clamped on to the outside of the pipe so it is not necessary to cut pipes or stop flow for installation and there is no pressure loss. Clamp on Ultrasonic flowmeters can measure various types of liquids such as potable water, river water, industrial water, agricultural water, waste water, seawater and pure water.

Ultrasonic Clamp On Flow Meter can be applied to measure the fluid flow in all pipe sizes and types of materials like carbon steel, Stainless steel, HDPE, PVC and other. Clamp on flow meter should be capable of maintaining accuracy in working in conditions where there are temperature fluctuations in the process and the surrounding environment.

Clamp-On Ultrasonic flow meter operates using transit time measurement. By measuring the time it takes a sonic signal to travel a known distance with the flow stream and another signal travelling against the flow stream, it determines the velocity of the fluid being measured. With the sonic properties of the fluid and the pipe material factored in, users get an extremely repeatable accuracy on the volumetric flow rate being measured. Because the transmitter can process the signal of one or two sensors, it ensures additional economy and the ability to compare or contrast two flow streams, if required. The product is ideal for users looking for a process measurement device that is easy to install and can maintain flow measurement for clean liquids.​

Temporary applications are mainly offered using portable type meters and permanent types are mainly designed for fixed installations. Portable types generally have a memory log or data logging capability to record data and the types designed for permanent applications normally don’t have the recording or data logging capability. However certain types like the Sitelab SL1188 or SL1168  provide a toolbox for logging purposes and to aid in identifying some transitions or abnormal errors during abnormal flow conditions.

specifications :
Flow Range  : 0 to ±12 m/s 
Accuracy : ± 0.5 % of reading
Repeatability : ±0.3% of reading
Pipe Size : 25mm to 5000mm
Liquid : All kind of liquid
Pipe : All kind of Matrial Pipe
specifications :
Flow range : 0  ~  ±40 f t /s (0  ~  ±12m/s)
Accuracy : ±1.0%
Repeatability:0.2%
Pipe size : 1 in to 40 in (25mm ~ 1200mm)

Liquid : water

specifications :
Transmitter (standard): 
Velocity range: 0 ~ ± 40ft/s (0 ~±12m/s) 
Accuracy: ±1% of reading 
Power for 16 hours 
Transducers (magnetic clamp-on sensor rack) 
Measurement Pipe range: 25mm ~ 1200mm 
Temperature range: -10℃  ~ 80℃) 
Transducer cable standard length: 16ft (5m) 
Liquid : All kind of liquid

Pipe : All kind of Material pipe

Advertisements

Article Flowmasonic: Rudy flow meter Wiratama

Flow Meter Air Baku PDAM

Flow meter air baku pdam adalah flow meter yang digunakan untuk mengukur debit air dan total volume air baku yang akan di proses guna menghasilkan kwalitas air sesuai standart pdam. Air baku pdam bisanya dimabil dari sungai, bendungan, waduk atau sumur bor dan untuk daerah tertentu mungkin mengambil dari air laut yang di proses menjadi […]

Thermal Mass Compress air and gas flow meters VA500

Flow sensor for compressed air and gas – VA 500 Contrary to the previously used bridge circuit the newly developed evaluation electronics of our flow sensor records all measured values digitally. This leads to a better accuracy also in case of large measuring spans of 1:1000. What are the advantages of our flow measuring technology? […]

Flow meters for compressed air and gas

Fow meters from CS Instruments work according to the calorimetric measuring principle. This means, while measuring the thermal mass flow or standard volume flow, no additional temperature and pressure compensation is necessary. The standard volume is a common volumetric unit used to compare gas quantities at different pressures and temperatures. In order to meet various […]

Batch Controller N series fluidwell

The product group “Batch Controllers” offers multiple batch controllers in the N-Series, F-Series and D-Series product ranges. The batch controllers can be used for accurate dispensing of small amounts of liquids up to the loading of trucks with two-stage control and analog multi-stage control. Specially designed for the delivery of unknown quantities of product is […]

Flow Computers fluidwell

The product group “Flow Computers” offers a unique range of comprehensive solutions to calculate the consumption and net flow at standard conditions or the ratio between two flows. Typical applications are found on board of ships to calculate the fuel consumption, gas flow calculation in power plants and the monitoring of two component blending. The […]

 

Ada yang ingin ditanyakan silahkan

1. Jika ada Pertanyaan tentang Product ataupun harga silahkan langsung hubungi :

2.  Jika ada pertanyaan atau diskusi Tentang tulisan disini silahkan email ke :            admin@rudywinoto.com

  Atau silahkan isi kolom dibawah ini dan klik submit      

  Flowmagflowmasonic          
%d bloggers like this: