Kobold provides two Manifold Valves for Multiple Installation: USR (for liquids) and BVB for lubricationg oil circuits.
Relief control Valve adalah jenis safety valve yang digunakan untuk mengontrol atau membatasi tekanan dalam suatu sistem. Tekanan yang menumpuk dapat menciptakan gangguan proses.
Parker’s direct acting 4-way, 3-position spool-type solenoid valves feature a robust design that ensures reliable and repeatable performance with minimized pressure drop.
Valves of the type 4WS2EM are electrically operated, 2-stage directional servo valves with porting pattern. They are mainly used to control position, force, pressure or velocity.
Valves of this type are electrically operated, 2-stage directional servo valves with porting pattern according to ISO 4401. They are mainly used to control position, force, pressure or velocity.
Series AK/AKH/AKB check valves offer various configurations to provide design solutions based on operating conditions. The series is compact and lightweight with low cracking pressure.
Series BD servovalves provide high resolution in the control of position, velocity and force in motion control applications.
The DF1P hydraulic control valve is the preferred choice for highest accuracy in positioning of hydraulic axis and controlling of pressure and velocity.
Integrated Valve and Actuator Control – IVAC – combines a linear actuator, a glandless control valve, two reed or solid state switches and speed controllers into one integrated product
Valve manifolds are commonly used on machine installations to reduce assembly and downtime and provide easier fault diagnosis.
53-SY SMC Pneumatic Solenoid Valves – 5 Port designed to be used in hazardous location by limiting the energy that could cause ignition when used with properly sized barriers.
Tokyo Keiki is a Compact solenoid directional valve for use up to max. 21 MPa.
Resin molded, 50/60 Hz dual frequency, two-terminal coils do not require rewiring for differing frequencies.
The RS type is a regulator for gas pipelines according to EN 88. It is equipped with a safety shutoff valve that blocks gas flow in event of outlet pressure being too low or too high.
The R type can be equipped with an integrated filter (type RF) according to DIN3386. This device is suitable for supplying clean gas at stable pressure to all the devices downstream.
The VS type is a pressure relief valve to reduce temporary pressure surge in burning appliances. The shutting-off of automatic valves or non-tightly closing of regulators can cause pressure increase
The R type is a high-pressure regulator for gas according to with EN 334. It is available also with a safety shut-off valve which blocks gas flow in event of outlet pressure being too low or too high.
This constant flow valve has been developed for control of water and chemical flows. It maintains liquid flows constant against fluctuations of both primary and secondary pressures.
T Series is a high-performance diaphragm valve with threaded ports. Available with integral pilot or as a remotely piloted valve. Outlet at 90°
Modulating valves LMV are used in combustion processes that require linear adjustment of gas flow. It can be operated with stage control or with continuous modulation (analog signals, MZ5 servomotor)