Pulsarpoint 310 is a rotating paddle level switch for level measurement and switching on bulk solids. The Pulsarpoint 310 has a diecast aluminium housing sealed to IP66
Pulsarpoint 300 is a rotating paddle level switch for level measurement and switching on bulk solids.
The proven flowmeters and switches model DSV are based on the principle of the well-known float-type flowmeters except for the conventional tapering measuring tube.
The Mobrey 003 switch is designed for high or low level alarm duties.
The paddle switch may be used as either a high or low level limit switch.
These level switches can be optionally supplied mounted vertically in chambers, in a sealed or removable form.
The vibrating rod level switch is the perfect solution for single point level switching in free flowing solids across a wide density range, from fine powders to grains.
The level regulator is a float switch that allows electrical equipment to start and stop automatically (usually pumps, but also solenoid valves, alarms, etc.) when a prefixed level has been reached.
The most essential characteristic of these products is its high reliability and its shape which no edges for which it is particularly suitable for Water, Sewage, and dirty water.
The new generation of PS858 sensors was developed in close coordination with the users. Its modern and userfriendly design stands out. High overload protection and best accuracy.
Feature: Sensitivity can be easily adjusted using an internal high strength spring. Since the structure is simple, troubles occur rarely and maintenance is easy. Easy handling and wiring
The FL Seriesis a range of vertically mounted, single float level switches operating on the proven reed switch and magnet principle.
Level Sensor or Level Control or Level Tank or Level Meter products are tools to measure the height of a or some material(s).
Vantsu Vibrating Probe Level Switch is point level switches that are designed to detect low or high levels of liquids.
JC7 Parker Rotary Paddle level switch prevents overfilling of tanks and silos and ensures tanks do not run too low, possibly interrupting production.
Liquid Float Level switch is a device used to control a pump, an alarm, or control other devices. One type of float switch uses a mercury switch inside a hinged float., Parker JRS Float level switch
Level switch Parker JF-302T merupakan switch level suatu tanki untuk pemutus rangkaian dengan pelampung stainless steel secara otomatis untuk minyak , oli, solar dan lainnya
level meter, level sensor, level switch, liquid level sensor, Optical Level Switch, Pressure Switch, Float Level Switch
Level Sensor, Level Transmitter, Float Level Meter, Mechanical Level Sensor
When the liquid level increases or decreases as the power supplied to the unit are connected to a sensor, a relay installed to the unit allows the water supply and piping to operate automatically.
Float Level Controllers, Level Control, Level Transmitter, Level Indicator
The paddle of the sensor rotates 1 time per minute. As the content in the tank fills up and influences the rotation of the paddle to stop, the relay in the sensor activates.
It makes output of on/off signal as the quick float moves up and down in which micro switch or reed switch installed. The on/off signal from the sensor controls supply/drain motor and/or high/low alarm. It is able to make up to 3 motors working together.
Providing electric voltage of DC 24V to the sensor, it makes output of 4~20mA current which is converted by resistors in the sensor.