Continuous Radar level sensor provides non-contact continuous level measurement of difficult liquids and solids that cannot be measured with ultrasonic sensor
JC7 Parker Rotary Paddle level switch prevents overfilling of tanks and silos and ensures tanks do not run too low, possibly interrupting production.
Liquid Float Level switch is a device used control a pump, as an indicator, an alarm, or to control other devices. One type of float switch uses a mercury switch inside a hinged float.
Level switch Parker JF-302T merupakan switch level suatu tanki untuk pemutus rangkaian dengan pelampung stainless steel secara otomatis untuk minyak , oli, solar dan lainnya
Level Transmitter HD1200 Overview Advanced level sensing algorithm suppresses the noise level and artifacts and enabled stable measurement. One main unit handles two sensors at once. Two different types of sensors can be installed and each may measures different range. Data logging function to micro SD TM. Flow measurement by measuring catchment level is possible.… Read More
HD serie Honda Elecronic Level meter are Level Sensor use ultrasound to count distance of level liquid
The ultrasonic level meter tds200 is the intelligent non-contact liquid level measuring instruments.
15.Rotary Paddle Level Switch-SE Series Principle The SE series operating principle is simple. A unit is usually located through a bin wall at the top, middle or low level of a bin. During normal operation (no material present) a synchronous motor rotates the paddle at 1 RPM. When this paddle rotation is impeded… Read More
10.RF-Capacitance Level Transmitter-EB Series Principle Capacitance Level Indicator: Utilizes the capacitance formed between the sensing probe and the metallic vessel wall. A high frequency sine-wave is applied between the probe and the vessel wall. A change of the medium level will induce a change in the current of the applied sine wave.From Z=1/2pfc, when the… Read More
Mini Float Level Switch-FC/FD Series Principle When the magnetic field of permanent magnet inside the float is moved into to the proximity of the reed switch inside the stationary stem, the reed switch “snaps” the contact together and closes the electrical circuit. When the magnetic field is moved away from the reed switch, the reed switch… Read More