Advertisements

Gas Analyzer

NGK Gas Analyzer

Since its establishment, NGK has been engaged in manufacturing ceramic insulators and is now recognized as a leading manufacturer throughout the world. Over the past years, NGK developed O2 analyzers using technology based on ZIRCONIA. Most recently, NGK has produced various instruments independently or together with other manufacturers by adapting unique technology based on ZIRCONIA and INFRA-RED rays. NGK now offers a complete range of measuring instruments in addition to consultation on instrumentation and various system components.

 

Selection Table by Industries

Industry
Facility and Application
Models by Measuring Principle
Zirconia
Infra-red
Foodstuffs
Monitoring atmosphere in foodstuff storage
SH-IID
Paper and Pulp
Measuring water content of chips and paper
Measuring O2 content in soda recovery boiler
TF-III
TF-10
Textiles
Measuring O2 content in industrial boilers
TF-10
PA-210-A
Petroleum and Petrochemicals
Measuring O2 content in industrial boilers
TF-10
PA-210-A
Gases
Measuring O2 in units generating N2
SH-IID
SH-301
Ceramics and Fine 
Ceramics
Atmosphere measuring of kilns
SH-IID
PA-210-B
Iron and Steel
Measuring water content of raw materials for sintering and coal for coke charging
Measuring dust in sintering, blast, and revolving furnaces
ISS-101
Measuring gas components in continuous annealing plants
TF-III
IAG-500
Measuring N2, O2, Ar, etc. in oxygen plants and others
SH-IID
Measuring O2 in exhaust gases of hot blast stoves, heating and soaking furnaces
TF-III
PA-210
Measuring O2 in exhaust gases of industrial boilers
TF-III
TF-10
Metallic Products and Machine Parts
Atmospheric control of oil carbonizing and thermal refining ovens
CP
Primer Movers and Shipbuilding
Industrial boiler, inert gas system
TF-10
TF-SR
Industrial Machinery
Industrial boilers, Measuring NOX in desulfurizing units
TFN-10D101
TFN-20D201
Semi Conductors and Electronic Parts
Measuring O2 for various types of furnace
SH-IID
Measuring O2 in reflow furnaces
SH-201
TFN-30D201
Measuring O2 in diffusion furnaces
SH-301
TFN-21D201
Automotive
Atmospheric control oil carbonizing and thermal refining ovens
CP
Power Station
Measuring O2 at outlet of boiler economizer
MLP-10
TF-11
Measuring O2 in boiler window box
TF-12
Measuring dust at outlet of electric precipitator boiler (EP)
ISS-101
Measuring NOX in desulfurizing units
TFN-20D201
Incinerators
Measuring O2
TF-10
TF-IV
Measuring NOX and SO2 at inlet of smokestack
IAG-500
Measuring dust at inlet of smokestack
ISS-101
Advertisements

Recent Posts: Flow meters Wiratama

Rheonik Coriolis Mass Flow Meters

The Rheonik coriolis meters are primarily Mass Flow Meters and they can measure mass very accurately. These two components are RHM coriolis flow sensors and RHE Coriolis Flow Transmitters

Elektrogas Automatic Safety Solenoid Valves

Safety solenoid valves for air and gas from delta elektrogas has many models such as VMM, vmh, vmr, vml, and VMRNA

VMH Elektrogas Safety shut off valves for gas

The VMH type valve is a safety shut off valve for gas with a hydraulic actuator. It is suitable for air or gas blocking and releasing controls, required in the main pipe of gas power burners, atmospheric gas boilers, industrial kilns, and others gas-consuming appliances

Solenoid Valve Shako Pneumatics

SHAKO Pneumatics has dedicated its entire resources to the field of pneumatic products and committed its energies to develop and produce new products

Air Diaphragm Pumps

An Air Diaphragm Pumps is a type of positive displacement pump that uses compressed air as a power source.

Vane Air Motors and Air Gear Motors Tonson

Air Motors are designed to operate by compressed air. For applications, where positive braking is a requirement, a range of caliper brakes is offered.

Air Winches for lifting and pulling in Hazardous Area

An air winch is powered by compressed air instead of electricity. The drive mechanism of the air winch will begin to power the cable drum and effectively raising or lowering the attached load

Perlunya Resetting dan Kalibrasi Flow meter secara berkala

kalibrasi flow meter dimaksudkan untuk mengembalikan performa flow meter guna mendapatkan faktor ketidak pastian pengukuran, yang merupakan akurasi flow meter dengan flow caliberator dan resetting

Dimensi Flange ANSI

Dimensi Flange Ansi#150

VALCOM – PRESSURE SENSOR

Valon pressure sensor products, vpr2, vprv-d, VSW2, VPRT, VDP4, VFM, VPRH, VPMC, Pressure Meter

 

Ada yang ingin ditanyakan silahkan :

1. Jika ada Pertanyaan tentang Product ataupun harga silahkan langsung hubungi :

 .

2.  Jika ada pertanyaan atau diskusi Tentang tulisan ini silahkan email ke admin@rudywinoto.com

.

Atau silahkan isi kolom dibawah ini dan klik submit  

.  

 
About Rudy Wiratama (980 Articles)
rudywinoto.com/wmablog.com/flowmasonic.com
%d bloggers like this: