Electromagnetic iMAG series Flow Meter

The iMAG-Series magnetic flow meter is the most economical flanged electromagnetic electromagnetic flow meter on the market. With electrodes designed to discourage fouling, it is available in 4” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications. (For 3” version, see iMAG 4600-300.) Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow.

iMAG-Series magnetic flowmeters are NSF-61 approved and are rated IP68 for applications where the meter may be operated under water to a depth of at least 10 feet (3 meters) continuously. The display can be meter mounted or remote, and both rate and total indication are standard.

Rate and total units and pulse scaling can be set via the front panel touch key pad by the user. Bidirectional flow is standard with forward, reverse and net flow. A power/output cable allows outputs for use with a variety of Seametrics and other displays and controls for remote reading and telemetry applications. Pulse output is standard on all models and 4-20mA passive current loop is standard on the iMAG 4700p. In addition, 4-20mA loop, HART protocol, high speed digital, and Modbus® protocol outputs are optional on the externally powered units, depending on model..

 

The iMAG-Series are the most economical flanged
electromagnetic flowmeters on the market. With electrodes
designed to discourage fouling, it is available in 4” to 12”
pipe in municipal or industrial water, waste and reclaimed
water, pump stations, and packaged plant applications.
(For 3” version, see iMAG 4600-300.) Minimal straight
pipe requirements allow iMAG-Series meters to be used in
piping configurations where there is little space between
the meter and an elbow. iMAG-Series meters are NSF-61
The iMAG-Series are the most economical flanged
electromagnetic flowmeters on the market. With electrodes
designed to discourage fouling, it is available in 4” to 12”
pipe in municipal or industrial water, waste and reclaimed
water, pump stations, and packaged plant applications.
(For 3” version, see iMAG 4600-300.) Minimal straight
pipe requirements allow iMAG-Series meters to be used in
piping configurations where there is little space between
the meter and an elbow.
iMAG-Series meters are NSF-61 approved and are rated
IP68 for applications where the meter may be
iMAG4700r ( Remote)
The iMAG-Series are the most economical flanged
electromagnetic flowmeters on the market. With electrodes
designed to discourage fouling, it is available in 4” to 12”
pipe in municipal or industrial water, waste and reclaimed
water, pump stations, and packaged plant applications.
(For 3” version, see iMAG 4600-300.) Minimal straight
pipe requirements allow iMAG-Series meters to be used in
piping configurations where there is little space between
the meter and an elbow.
iMAG-Series meters are NSF-61 approved and are rated
IP68 for applications where the meter may be
read more…
 

Ada yang ingin ditanyakan silahkan :

1. Jika ada Pertanyaan tentang Product ataupun harga silahkan langsung hubungi :

 .

2.  Jika ada pertanyaan atau diskusi Tentang tulisan ini silahkan email ke admin@rudywinoto.com

.

Atau silahkan isi kolom dibawah ini dan klik submit  

.  

 
About Rudy Wiratama (957 Articles)
rudywinoto.com/wmablog.com/flowmasonic.com

Leave a Reply

%d bloggers like this: