Advertisements

DFM Diesel Flow Meter

Diesel Flow Meter
Fuel Engine Flow Meter

Fuel flow meters DFМ. Actual fuel consumption  Measuring

 

Fuel flow meter DFМ is designed for diesel fuel consumption measuring in the fuel line of the following vehicles:
  • trucks;
  • tractive vehicles;
  • tractors of various types;
  • loaders;
  • graders;
  • road-building machinery;
  • boilers;
  • boats;
  • burners;
  • technological transport;
  • fixed installations with diesel engines etc.
Inline fuel meter DFМ can be applied for fuel accounting both autonomously and as a part of vehicle tracking and fuel monitoring system.Fuel gauge DFM allows to solve the following tasks:

  • fuel consumption control;
  • fuel consumption rationing;
  • fuel theft detecting and preventing;
  • fuel comsumption optimization and real-time monitoring;
  • engine fuel consumption testing.
Fuel meter DFМ enables to receive objective information about actual fuel consumption and vehicle working time. It also permits to reduce fuel and repairing costs. It is possible to develop fuel consumption rates for selected routes and technological operations.
The economic effect of using the fuel accounting devices is different at various companies, usually about 10 to 40%, depending on the baseline situation and management persistence.
Operating principle
Fuel gauge DFM has three-dimension ring type measuring chamber. DFМ generates an impulse, when the volume of fuel (which is equal to volume of the measuring chamber) passes through it. For detailed operating principle for every DFM model please visit product pages.
Measured fluids
Fuel flow meter DFМ can be used for consumption measuring of the following fluids:
  • Diesel fuel
  • Fuel Oil
  • Heating oil
  • Engine oil
Other types of liquids with kinematic viscosity from 1.5 to 6 mm2/sec*.
* Application for more viscous liquids is also possible, but the maximum consumption may get less than critical and the pressure on the meter gets down.
* All the meters DFM are tested with diesel fuel.
* Please specify the fuel type and viscosity in your order.
* The materials resistant to gasoline are used for DFМ manufacturing.
* Use safety means in accordance with the national laws when working with gasoline.
Features
  • Protection against unauthorized interference and tampering with the meter
  • Resistant to vibration and hydraulic impacts
  • Big in-built mud filter
  • Meets road standards of electromagnetic compatibility, mechanical and climatic influences
  • Durable and precise measurement zinc-aluminum chamber
  • Full set of mounting accessories
  • All the fuel flow meters DFM are tested on the metrologically certified installation when produced.
Specification
  • Connecting thread         :  M14x1.5
  • Nominal pressure, MPa :  0.2
  • MAX pressure, MPa :  2.5
  • Supply voltage, V   :   10-50
  • Overvoltage protection, V  : ≤100
  • Current consumption, mA  : ≤25 (24 V)      and  ≤50 (12 V)
  • Operating temperature, °C :   -40 to +80 and  -20 to +60 ( with display: )
Installation
Fuel meters DFМ are mounted into fuel line of vehicles according to approved installation schemes. Fuel pipe and mounting kit can be additionally included in delivery package. We strongly recommend to seal pipe connections after the fuel flow meter output. To get the detailed information about fuel gauges DFМ installation please contact to Technical Support.
Measurement scope and accuracy
Model
Bore Size
Consumption
Flow Rate (l/h)
Inaccuracy
l/h
Min
Max
±%
DFМ 50 AK, B, C, CK
6
0.5
1
50
1
DFМ 90 AP
6
0.5
3
90
2
DFМ 100 AK, B, C, CK
6
0.5
2
100
1
DFМ 220 AP
8
2
8
220
2
DFМ 250 AK, C, CK
8
2
5
250
1
DFМ 400 AK, C, CK
10
20
30
400
2
Ordering information
The range of DFМ devices includes the following models :

 

  • Autonomous fuel flow meter with display (fuel counter)
  • Fuel flowmeter with pulse interface
  • Differential fuel flow meter
Fuelflow meters models designation for the ordering 
DFM models choice for internal combustion engine/boiler
Engine power
Boiler heat
Recommended 
Recommended 
( KW )
productivity, kW
inline fuel meters
mounting kits
under 80
under 400
DFM 50
№ 2
80-150
400-800
DFM 90,
№ 2
DFM 100
150-300
800-1500
DFM 220,
№ 4
DFM 250
300-500
1500-3500
DFM 400
№ 4
read more….
Advertisements

Recent Posts: Flow meters Wiratama

Elektrogas Automatic Safety Solenoid Valves

Safety solenoid valves for air and gas from delta elektrogas has many models such as VMM, vmh, vmr, vml, and VMRNA

VMH Elektrogas Safety shut off valves for gas

The VMH type valve is a safety shut off valve for gas with a hydraulic actuator. It is suitable for air or gas blocking and releasing controls, required in the main pipe of gas power burners, atmospheric gas boilers, industrial kilns, and others gas-consuming appliances

Solenoid Valve Shako Pneumatics

SHAKO Pneumatics has dedicated its entire resources to the field of pneumatic products and committed its energies to develop and produce new products

Air Diaphragm Pumps

An Air Diaphragm Pumps is a type of positive displacement pump that uses compressed air as a power source.

Vane Air Motors and Air Gear Motors Tonson

Air Motors are designed to operate by compressed air. For applications, where positive braking is a requirement, a range of caliper brakes is offered.

Air Winches for lifting and pulling in Hazardous Area

An air winch is powered by compressed air instead of electricity. The drive mechanism of the air winch will begin to power the cable drum and effectively raising or lowering the attached load

Perlunya Resetting dan Kalibrasi Flow meter secara berkala

kalibrasi flow meter dimaksudkan untuk mengembalikan performa flow meter guna mendapatkan faktor ketidak pastian pengukuran, yang merupakan akurasi flow meter dengan flow caliberator dan resetting

Dimensi Flange ANSI

Dimensi Flange Ansi#150

VALCOM – PRESSURE SENSOR

Valon pressure sensor products, vpr2, vprv-d, VSW2, VPRT, VDP4, VFM, VPRH, VPMC, Pressure Meter

Showa Giken Pearl Rotary Joint and Swivel Joint

Showa Giken Pearl Rotary Joints and Swivel joint are used for supplying/discharging compressed or decompressed fluid/gas from a fixed piping to the rotary section of various machines with no leak

 

Ada yang ingin ditanyakan silahkan :

1. Jika ada Pertanyaan tentang Product ataupun harga silahkan langsung hubungi :

 .

2.  Jika ada pertanyaan atau diskusi Tentang tulisan ini silahkan email ke admin@rudywinoto.com

.

Atau silahkan isi kolom dibawah ini dan klik submit  

.  

 
About Rudy Wiratama (987 Articles)
rudywinoto.com/wmablog.com/flowmasonic.com
%d bloggers like this: