Tonson Air Motors
Air Motors are designed to operate by compressed air. In Application, used with filter, regulator, and lubricator to improve performance and provide longer life.
Users should be responsible for determining the suitability of the product for the intended use and assuming all risk and liability whatsoever in connection therewith. Air Motors can easily operate under conditions which are unfavorable for electric, hydraulic, stepper and servo motors.
- 100% Explosion-proof
- Never Burn Out
- Mounting Flexibility
- Stalling Safety
- Self-Sealing & Cool Running
- All Plane Operation
- Stepless Speed Control
- Smooth Start
- Toleration of Environment
For product liability and safety reasons, any modifications to the product(s) or its accessories must be agreed upon by the technical authority of the manufacturer.
- Hoist / Winches
- Conveyor Drives
- Automation Devices
- Hose Reels
- Mixing Equipment
- Choppers / Grinders
- Pump Drives
- Food / Pharmacy Packaging
For applications where precise and variable turning power and speed is a requirement. Examples are bolt tensioning equipment or rock drilling rigs, precise lifting, lowering, traversing or turning. Unlike electric gear motors, no chance of burn-out nor heat buildup with TONSON Air Motors. A direction of rotation is instantly reversible.
Precise Turning Power, High Torque Capacity
Air Brake Motor
For applications, where positive braking is a requirement, a range of caliper brakes is offered. These are designed to withstand full stall torque of the air motor. The brake consists of two spring supplied shoes pressed against a central hub. The shoes are released by applying air pressure to the cylinder/piston assembly. The brake torque can be carried by an adjustment of two spring adjusters. But, it is normally set so that a pilot pressure of 4 bar (60 PSI) will fully release it.
Recent Posts: Flow meters Wiratama
The Rheonik coriolis meters are primarily Mass Flow Meters and they can measure mass very accurately. These two components are RHM coriolis flow sensors and RHE Coriolis Flow Transmitters
Safety solenoid valves for air and gas from delta elektrogas has many models such as VMM, vmh, vmr, vml, and VMRNA
The VMH type valve is a safety shut off valve for gas with a hydraulic actuator. It is suitable for air or gas blocking and releasing controls, required in the main pipe of gas power burners, atmospheric gas boilers, industrial kilns, and others gas-consuming appliances
SHAKO Pneumatics has dedicated its entire resources to the field of pneumatic products and committed its energies to develop and produce new products
An Air Diaphragm Pumps is a type of positive displacement pump that uses compressed air as a power source.
Air Motors are designed to operate by compressed air. For applications, where positive braking is a requirement, a range of caliper brakes is offered.
An air winch is powered by compressed air instead of electricity. The drive mechanism of the air winch will begin to power the cable drum and effectively raising or lowering the attached load
kalibrasi flow meter dimaksudkan untuk mengembalikan performa flow meter guna mendapatkan faktor ketidak pastian pengukuran, yang merupakan akurasi flow meter dengan flow caliberator dan resetting
Dimensi Flange Ansi#150
Valon pressure sensor products, vpr2, vprv-d, VSW2, VPRT, VDP4, VFM, VPRH, VPMC, Pressure Meter