Description
Burkert Valve 6011 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold.
Push-in fittings can be selected for flexible hose connection. In combination with a cable plug in accordance with industry standard Form B or DIN EN 175301-803 Form C, the valves satisfy protection class IP65. This product can be combined with Cable Plug Type 2507 and Type 2516.
Features
- Direct-acting and compact small-format valve with diameter of up to DN 2.4
- Screwed coil system
- Simple and quick flange or manifold installation
- Quick coupling (push-in fitting) for plug-in hose connections
Specifications
Technical Data
Product properties
| Dimensions | Detailed information can be found in chapter “4. Dimensions” on page 5 of datasheet. |
| Material | |
| Seal | FKM |
| Body | Standard version: Brass, polyamide (PA), stainless steel 1.4305 |
| Analytical version: Brass, stainless steel 1.4305 | |
| Weight | Ca. 125 g |
Performance data
| Duty cycle/single valve when mounted as a block on a manifold | 100% continuous rating Intermittent operation 60% (30 min) or with 2 W coil (on request) |
| Circuit function | A |
Electrical data
| Operating voltage | |
| Standard version | 24 V DC, 24 V/50 Hz, 110/230 V/50 Hz |
| Analytical version | 24 V DC, 230 V/50 Hz |
| Voltage tolerance | ±10% |
Medium data
| Medium | |
| Standard version | Technical vacuum, neutral gases and fluids (e.g. compressed air, water, hydraulic oil) |
| Neutral/aggressive medium that do not attack the body and seal materials | |
| Analytical version | |
| Viscosity | Max. 21 mm²/s |
| Medium temperature | -10…+100 °C |
Approvals and certificates
| Degree of protection | IP65 with cable plug |
Product connection
| Standard version | M5, G ⅛, sub-base |
| Analytical version | G ⅛, sub-base |
| Electrical connection | To DIN EN 175 301-803 Form C for cable plug Type 2516 (see “5.4. Ordering chart accessories” on page 11 of datasheet) |
| To industry standard connector Form B for cable plug Type 2507 (see “5.4. Ordering chart accessories” on page 11 of datasheet) |
Environment and installation
| Installation position | As required, preferably with actuator upright |
| Ambient temperature (max.) | +55 °C |
| Installation instructions | No oil, grease or silicones to be used as installation aids |
Download Datasheet: Burkert Type 6011 Plunger Valve 2/2 Way Direct-acting
Refernce : burkert-usa.com
Other Article: