P16 SERIES

P16 SERIES

Construction
  • Cast iron pumping sections for durability
  • Aluminum body and flange for excellent power to weight ratio
  • Journal bearings for long life and good over-hung load capacity
  • Buna-N seals are standard for petrolium & glycol based fluids – “Viton®” seals are optional
  • Preasuse balanced plates for greater efficiency
Available Configurations
  • P16 – Standard
  • TP16 – Tandem, 2 and 3 Place
  • PVP16 – Priority Vavle
  • CP16 – Clutch Pump, “V” Belt and Serpintine
  • TP-PVP – Combination P16 with Priority Vavle
  • PB16-P12 – Piggy Back
  • HP16 – High Preasure
  • THP16 – Tandem High Preasure
  • FPR16 – Cast Iron, Bi-directional
P16, TP16, PVP16, CP16, TP16-PVP16 Models
  • Fluid displacements to 3.9 cir (63.9 ccr) 
  • Preasures to 3000 psi (206 bar)
  • Flow range to 38 gpm (143.8 lpm) per section,  the TP16 is 32 gpm (121 lpm)
  • Prioity Flow range 2 to 10 gpm (7.5-37.8 lpm) standard (PVP16 only)
PB16-P12 Model
  • Flow ranges
    • Front pump to 42 gpm (158.9 lpm)
    • Rear pump to 42 gpm (158.9 lpm)
  • Displacements<ul (63.9="" 3.9="" ccr)
  • Rear pump to 0.90 cir (14.3 ccr) 
  • Preasures
    • Front pump to 3000 psi (206 bar)
    • Rear pump to 2500 psi (172 bar)
  • HP16 & THP16 Models
    • Displacements to 4.8 cir (79.8 ccr) 
    • Preasures to 3100 psi (213 bar)
    • Flow range to 46 gpm (174 lpm) per section THP16 – 42 (158.9 lpm) per section
    FPR16 Model
    • Displacements to 3.902 cir (63.9 ccr)
    • Preasures to 3000 psi (206 bar)
    • Flow range to 42 gpm (159 lpm) per section
    • All cast iron construction

    Product Category Selection

    %d bloggers like this: