News Topic

Gas Vortex Flow Meter

Alia Vortex Flow Meter
Vortex Flow Meter
Gas Flow Meter
Flow Meter Gas

ALIAVTX AVF7000 is a Vortex Flowmeter based on Von Karman theory of vortices generated by a bluff body in the pipe. The number of vortices are linearly proportional to the volumetric flow in the pipe.
The AVF7000 is versatile flowmeter widely used for Gases, Steam & Liquid applications. There are no moving parts and comes with either Flange or wafer connection. Standard configuration have local indication for flowrate and total flow as well as a 4-20mA output functions. The microprocessor design can filter out erroneous signals as well as interfence caused by pipe vibration.


  •  Simplified setup and self-diagnostic functions  
  •  Auto. Temperature & Pressure compensation   
  •  4-20 mA and pulse outputs, user selectable  
  •  a very wide selection of sizes  
  •  Wide temperature range which can up to 420 Deg. C  
  •  Non-volatile memory for setup and calibration 

Size: Local display:
10,15,20,25,32,40,50,65,80,100,125,150 4 lines LCD
200,250,300,350,400,450,500mm 4 digit flowrate
Measuring Range: 8 digit Totalizer
Steam – 1.6 to 540,000 Kg/Hr Current output:
Gas – 3 to 46,000 M3/Hr 4-20 mA (2 wire)
Liquid – 0.3 to 4950 M3/Hr Load
Material: 600 Ohm
Stainless Steel 301 / 304 / 316 Pulse output:
Accuracy: Scale Pulse(3 wire)
Liquid Rating
+/-0.7% value of reading 3 to 30VDC, 20mA Max.
Gas & Steam Communication:
+/-1.0% value of reading RS485
Repeatability: Data storage:
+/-0.2% value of reading Operation Parameter and Totalizer
Process Connection: Figures are stored by EEPROM for more
Flange / Wafer than 10 years
Flanges type Housing Material:
JIS 10K / JIS 20K / JIS 40K Aluminum Alloy
ANSI 150# / ANSI 300# / ANSI 600# Cable Entry:
DIN PIN 10 / PN 16 / PN25 / PN 40 2 X M20 *1.5
Wafer type Power supply:
DN40~DN250 12-36 VDC
without Temperature / Pressure Sensor Ni-MH Battery(3 years working Hours)
Temperature: Key Pad:
-40 ~ +280 Deg. C (Standard) 4 keys from internal for Programming
-40 ~ +420 Deg. C (Optional) and display control
Ambient Temperature: Option:
-20 ~ +60 Deg. C Pressure Sensor
Pressure: Pressure compensation
78 Kg/cm2 (Max.) Signal output
Protection: 0-30 mV DC(20 uA Power supply)
IP 65 Temperature sensor
Explosion Proof, Exd IIC T6 Temperature compensation
Intrinsically Safe, Eex ia IIC T4 Signal output
PT100 ohm (3 wires)


Articles: Rudy flow meter Wiratama

Flow Meter Air Baku PDAM

Flow meter air baku pdam adalah flow meter yang digunakan untuk mengukur debit air dan total volume air baku yang akan di proses guna menghasilkan kwalitas air sesuai standart pdam. Air baku pdam bisanya dimabil dari sungai, bendungan, waduk atau sumur bor dan untuk daerah tertentu mungkin mengambil dari air laut yang di proses menjadi […]

Thermal Mass Compress air and gas flow meters VA500

Flow sensor for compressed air and gas – VA 500 Contrary to the previously used bridge circuit the newly developed evaluation electronics of our flow sensor records all measured values digitally. This leads to a better accuracy also in case of large measuring spans of 1:1000. What are the advantages of our flow measuring technology? […]

Flow meters for compressed air and gas

Fow meters from CS Instruments work according to the calorimetric measuring principle. This means, while measuring the thermal mass flow or standard volume flow, no additional temperature and pressure compensation is necessary. The standard volume is a common volumetric unit used to compare gas quantities at different pressures and temperatures. In order to meet various […]

Batch Controller N series fluidwell

The product group “Batch Controllers” offers multiple batch controllers in the N-Series, F-Series and D-Series product ranges. The batch controllers can be used for accurate dispensing of small amounts of liquids up to the loading of trucks with two-stage control and analog multi-stage control. Specially designed for the delivery of unknown quantities of product is […]

Flow Computers fluidwell

The product group “Flow Computers” offers a unique range of comprehensive solutions to calculate the consumption and net flow at standard conditions or the ratio between two flows. Typical applications are found on board of ships to calculate the fuel consumption, gas flow calculation in power plants and the monitoring of two component blending. The […]


Ada yang ingin ditanyakan silahkan

1. Jika ada Pertanyaan tentang Product ataupun harga silahkan langsung hubungi :

2.  Jika ada pertanyaan atau diskusi Tentang tulisan disini silahkan email ke :  

  Atau silahkan isi kolom dibawah ini dan klik submit      


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: