Advertisements
News Topic

In Line Ultrasonic Flow Meters

Ultrasonic Flow Meter
In Line Ultrasonic Flow Meter

High Dynamic Response Inline Ultrasonic Flowmeter The model SL3488 inline ultrasonic flowmeter (here  in after referred to  as  SL3488)  is  a  true  state-of-the-art  transit-time  flowmeter designed  using  PICOFLY  technology  and  0.01nanosecond  (10 picoseconds)  resolution;  the  flow  sample  rate  achieved  is  256 discrete flow measurements per second, which provides a true high dynamic response flowmeter. This makes  this meter  for rapid on/off or pulsating flow applications.
 
Features 
  • Super Low Flow Rate Measuring
  • High dynamic response, real-time flow change trac
  • High reliability
  • Long-term stability
  • Menu driven operation (no instructions needed)
  • High accuracy: 0.5 % of measurement
  • Highly stable zero
  • PC enclosure (water and corrosion proof)
SL3488  is  designed  using  the  latest  digital  technology.  This meter  features  high  reliability,  low  maintenance  and  no  moving  parts. Unique digital  signal processing and  correlation programming  from the MPU  provide  instantaneous meter measurement  (no  damping  needed)  SL3488 has been tested under rigorous field working conditions and has  shown  steadfast  performance,  which  offers  the  customer confident worry-free measurement. Compared with other flowmeters  and other ultrasonic flowmeters, the SL3488 is characterized by high accuracy, high credibility, superior performance, very rapid response to flow changes, and low cost.

Applications by Industry 

  • Petrochemical
  • Refining
  • Steel
  • Metallurgy
  • Paper
  • Coal
  • Water supply
  • Seawater
  • Industrial process water
  • Irrigation
  • Cooling water
  • Oil
  • Beverage
  • Chemical

SL3488  High Dynamic Response Ultrasonic Flowmeter

  • Flow range        : 0~7m/s
  • Accuracy           : 0.5% of reading
  • Repeatability      : 0.15%
  • Output               : OCT pulse output,relay out
  • Communication  : RS232
  • Power supply     : 90~245VAC@50/60Hz 12~12VAC@50/60Hz 12~36VDC
  • Spool piece dimensions  :  DN8~DN250
Measurement Site Selection 
  • SL3488 inline ultrasonic flowmeter is easy and convenient to  install. When  the measured pipe size  is consistent with the spool piece size, you can select a proper measurement site and install the meter which is ready to use.
  • When  selecting  a  measurement  site,  it  is  important  to select an area where the fluid flow profile is fully developed to  guarantee  a  highly  accurate  measurement.  Use  the following  guidelines  to  select  a  proper  measurement installation site:
  • Choose  a  section  of  pipe,  which  is  always  full  of  liquid, such as a vertical pipe with flow in the upward direction or a full horizontal pipe.
  • Generally,  it  requires  at  least  10  D  (pipe  diameters) upstream & 5D (pipe diameters) downstream. If there is a pump, a  tee section, control valve, orifice, expansion  joint or other element which could cause flow disturbances, the upstream straight pipe required will be greater than 10D.
  • Ensure that the pipe surface temperature at the measuring point is within the transducer temperature limits.
Advertisements

Articles: Rudy flow meter Wiratama

Flow Meter Air Baku PDAM

Flow meter air baku pdam adalah flow meter yang digunakan untuk mengukur debit air dan total volume air baku yang akan di proses guna menghasilkan kwalitas air sesuai standart pdam. Air baku pdam bisanya dimabil dari sungai, bendungan, waduk atau sumur bor dan untuk daerah tertentu mungkin mengambil dari air laut yang di proses menjadi […]

Thermal Mass Compress air and gas flow meters VA500

Flow sensor for compressed air and gas – VA 500 Contrary to the previously used bridge circuit the newly developed evaluation electronics of our flow sensor records all measured values digitally. This leads to a better accuracy also in case of large measuring spans of 1:1000. What are the advantages of our flow measuring technology? […]

Flow meters for compressed air and gas

Fow meters from CS Instruments work according to the calorimetric measuring principle. This means, while measuring the thermal mass flow or standard volume flow, no additional temperature and pressure compensation is necessary. The standard volume is a common volumetric unit used to compare gas quantities at different pressures and temperatures. In order to meet various […]

Batch Controller N series fluidwell

The product group “Batch Controllers” offers multiple batch controllers in the N-Series, F-Series and D-Series product ranges. The batch controllers can be used for accurate dispensing of small amounts of liquids up to the loading of trucks with two-stage control and analog multi-stage control. Specially designed for the delivery of unknown quantities of product is […]

Flow Computers fluidwell

The product group “Flow Computers” offers a unique range of comprehensive solutions to calculate the consumption and net flow at standard conditions or the ratio between two flows. Typical applications are found on board of ships to calculate the fuel consumption, gas flow calculation in power plants and the monitoring of two component blending. The […]

 

Ada yang ingin ditanyakan silahkan

1. Jika ada Pertanyaan tentang Product ataupun harga silahkan langsung hubungi :

2.  Jika ada pertanyaan atau diskusi Tentang tulisan disini silahkan email ke :            admin@rudywinoto.com

  Atau silahkan isi kolom dibawah ini dan klik submit      

  Flowmagflowmasonic          

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: