News Topic

Plastic bodied Magnetic Flow Meter

The WMP-Series is a full-bore, plastic-bodied electromagnetic flow meter designed for flow and usage monitoring applications in 1 and 2 inch pipe.  The polypropylene flow tube offers corrosion resistance to a wide range of chemicals.  Its light weight and easy to install or remove from the pipe for inspection*.

With no moving parts, the magmeter permits unobstructed flow, minimizing flow disturbances and hence, straight pipe requirements.  The WMP-Series can be used in piping configurations where there is little space between the meter and an elbow or valve.  The WMP-Series, like other magmeters, are resistant to wear from sand and debris found in ground or surface water. Since there are no bearings or propeller to wear out, downtime and maintenance and repair costs are kept to a minimum. Because there are no mechanical parts in the flow stream, the meter tolerates high flows without damage.


  • No moving parts
  • Minimal straight pipe required
  • Battery powered
  • Built-in rate & total indicator
  • Corrosion resistant
  • Pulse output (WMP101 only)

Usage monitoring, such as:

  • Industrial wastewater discharge
  • Grey water
  • Well monitoring
  • Irrigation

The hinged, opaque polyethylene cover protects from dust and UV rays, while permitting easy access to the LCD flow rate and total display. The electronics housing is made of rugged powder-coated die-cast aluminum. It can be fitted with cross-drilled screws and seal wire for tamper-evidence.  Flow rate and total can be displayed in a variety of units, customer-selected and factory-set.

The WMP-Series is used for tracking flow rate and total flow in usage monitoring applications, for instance, in compliance with regulatory requirements.  These would include wells, industrial wastewater, heap leach mining discharge, cooling tower deduct metering, turf and landscape applications, and other water reclamation operations. In the event of DC power loss, or when changing the battery, the WMP is designed to retain the internal settings and flow total.

The  WMP101 is externally powered via a 5-pin connector cable which also provides pulse output for use with a variety of Seametrics and other displays and controls for remote reading, data logging, pulse-to-analog conversion, and telemetry applications.

The WMP104 is a battery-operated unit for use when pulse output is not required. The standard batteries are user replaceable with an approximate 1-2 year life depending on
usage. An extended battery life option offers an estimated 2-4 year life depending on usage.


Articles: Flow meters Wiratama

Flow meter ultrasonic 2 Path

Flow meter ultrasonic 2 path atau Double path merupakan jenis flow meter ultrasonic clamp on yang bisa di operasikan atau di instalasi di 2 pipa dengan ukuran dimeter pipa  yang sama maupun ukuran dimeter pipa yang berbeda. Jadi jika kita ingin mengetahui atau mengecek aliran suatu cairan dalam pipa dengan ukuran pipa berbeda ataupun sama […]

Flow meter Clamp On Ultrasonic

Flow meter clamp on ultrasonic adalah jenis flow meter yang cara kerjanya menggunakan ultra sound dan cara instalasinya cukup dengan di clamp pada permukaan pipa. Yang dimaksud dengan cara instalasi clamp on adalah saat melakukan instalasi kita tidak perlu memotong pipa maupun melubangi pipa. Dengan melakukan pemotongan pipa atau melubangi pipa, akan menghambat proses produksi […]

Flow Meter Open Channel

Open Channel Flow meter is a flow meter used to measure a flow in an open system wher the flow is due to a height difference such as the flow of water in the river or channel. Flow meter open channel adalah flow meter yang dapat diaplikasikan untuk mengukur aliran dengan kapasitas yang sedang seperti […]

Mengukur Debit Air Pada Kapasitas Aliran Besar

Dalam mengukur debit air pada kapasitas aliran besar mempunyai banyak implikasi terhadap jenis alat ukur atau flow meter, akurasi hasil pengukuran , biaya investasi, waktu instalasi dan maintenance alat ukurnya. Debit air dengan kapasitas aliran besar biasanya banyak di gunakan pada pembangkt lisatrik dalam hal ini biasanya PLTU dan PLTA, Produksi air minum (PDAM) dan […]

Rotary Paddle Level Switch Parker JC7

A level switch is a device used to detect the level of substances such as liquid, chemical solvent, powders, lumps within tanks, silos, and hoppers. In addition, a level switch prevents overfilling of tanks and silos and ensures tanks do not run too low, possibly interrupting production. JB series Rotary Paddle Level Switch Features : […]


Ada yang ingin ditanyakan silahkan :

1. Jika ada Pertanyaan tentang Product ataupun harga silahkan langsung hubungi :


2.  Jika ada pertanyaan atau diskusi Tentang tulisan ini silahkan email ke


Atau silahkan isi kolom dibawah ini dan klik submit  



Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: