Advertisements
News Topic

Horizontal Level Switch

DH Series
Level Switch
Horizontal Level Switch

Applications

The DH type level switch is used in the heavy oil, precipitate, sewage waste water, clean water, lubricating oil, and light oil tanks.

Operating principle
When the magnetic float type level switch  detects the surface level and emits the contact point output, the micro switch or reed  switch turns on or off. The two magnets completely separated by the  diaphragm each  operates. One is hanging at one end of the float and the other magnet is hanging on  the micro switch unit of housing.


Features

  • Complete waterproof  : The switch unit is completely separated.
  • Liability  : There is no problem since the allowed  contact point capacity is large with 250VAC  and 3A.
  • Easy Maintenance and Repair  : Since it is designed in a simple structure,  the maintenance and repair is easy.
  • Firm Float : The stainless steel float welded by the  argon gas is durable to high pressure and high temperature



Model number code system



Technical Data

Dimension [mm]

  • Model DH-100F
  • Model DH-100S
  • Model DH-200S

Table for Chamber Selection

Chamber Type & Installation

Terminal & Contact for SPDT. SPS
Advertisements

Articles: Rudy flow meter Wiratama

Flow Meter Air Baku PDAM

Flow meter air baku pdam adalah flow meter yang digunakan untuk mengukur debit air dan total volume air baku yang akan di proses guna menghasilkan kwalitas air sesuai standart pdam. Air baku pdam bisanya dimabil dari sungai, bendungan, waduk atau sumur bor dan untuk daerah tertentu mungkin mengambil dari air laut yang di proses menjadi […]

Thermal Mass Compress air and gas flow meters VA500

Flow sensor for compressed air and gas – VA 500 Contrary to the previously used bridge circuit the newly developed evaluation electronics of our flow sensor records all measured values digitally. This leads to a better accuracy also in case of large measuring spans of 1:1000. What are the advantages of our flow measuring technology? […]

Flow meters for compressed air and gas

Fow meters from CS Instruments work according to the calorimetric measuring principle. This means, while measuring the thermal mass flow or standard volume flow, no additional temperature and pressure compensation is necessary. The standard volume is a common volumetric unit used to compare gas quantities at different pressures and temperatures. In order to meet various […]

Batch Controller N series fluidwell

The product group “Batch Controllers” offers multiple batch controllers in the N-Series, F-Series and D-Series product ranges. The batch controllers can be used for accurate dispensing of small amounts of liquids up to the loading of trucks with two-stage control and analog multi-stage control. Specially designed for the delivery of unknown quantities of product is […]

Flow Computers fluidwell

The product group “Flow Computers” offers a unique range of comprehensive solutions to calculate the consumption and net flow at standard conditions or the ratio between two flows. Typical applications are found on board of ships to calculate the fuel consumption, gas flow calculation in power plants and the monitoring of two component blending. The […]

 

Ada yang ingin ditanyakan silahkan

1. Jika ada Pertanyaan tentang Product ataupun harga silahkan langsung hubungi :

2.  Jika ada pertanyaan atau diskusi Tentang tulisan disini silahkan email ke :            admin@rudywinoto.com

  Atau silahkan isi kolom dibawah ini dan klik submit      

  Flowmagflowmasonic          

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: