Advertisements
News Topic

Fuel Flow Counter ; fuel monitoring

DFМ autonomous fuel flow counter. Simple solution for fuel monitoring.

Autonomous fuel counter DFМ is a simple solution for fuel consumption control.
Fuel counter DFМ can be used to create a fleet fuel consumption accounting system.
Fuel flow counter DFМ represents information on the LCD display. Fuel consumption indications control and fixation are made visually by a responsible person with entering dаta to report.
Autonomous_fuel_flow_counter

SIMPLE SOLUTION FOR FUEL MONITORING

Application

It is supposed to use GPS trackers to organize the fuel consumption accounting system in a company. The application of DFМ counters is a simpler and cheaper way to do it. The fuel consumption accounting system based on the autonomous fuel counter DFМ is easy to install and maintenance. There is no need any additional costs for hardware and software.
Fuel flow counter DFМ is powered by built-in battery. Its resources are enough for more than 24 months of the device continuous operation. The fuel counter DFМ has no buttons – switching on the display is made with a special magnetic key.
Autonomous_fuel_counter_DFM_standby_mode Autonomous_fuel_counter_DFM_working_mode

The special form to be filled out by a responsible person for fuel control.


Features
  • The unique tampering and intervention protection functions of fuel counter DFМ allow using it in companies, where the chances of vandalism and discredit from some drivers are high.
  • If somebody will try to blow DFМ with the air, the air volume passed through the device would not considered in the counter of consumed fuel, but will get into special counter called “Tampering”.
  • The counter “Interference time” will protect from attempts to influence the device with a magnet. It registers the duration of exposure to the device with the magnetic field.
  • Along with the fuel monitoring function counters DFM have a function of engine operating time control (DFМ C model ). This functionality is very useful for some kinds of machines.
Controlled parameters
  • Instant fuel consumption, l/h
  • Total fuel consumption, l
  • “Overflow” counter, l
  • Total engine operating time, h*
  • Engine operating time in “idling” mode, h*
  • Engine operating time in “optimal” mode, h*
  • Engine operating time in “overload” mode, h*

* – these counters are accessible in “C” version only.
Display indications: fuel consumption counter.

Counter name Units of measurement
Total fuel consumption liter
Total fuel consumption with the increased accuracy liter



Display indications: time counter (DFМ C only)

Counter name Units of measurement
Total engine (Consumer) working time hour
Working time of the Consumer in “Idling” mode hour
Working time of the Consumer in “Optimal” mode hour
Working time of the Consumer in “Overload” mode hour



Display indications: tampering and interference counters

Counter name Units of measurement
Fuel consumption in “Tamper” mode liter
Time of interference hour



Display indications: Parameters

Counter name Units of measurement
Instant fuel consumption liter/hour
Measuring chamber temperature °С
Advertisements

Articles: Rudy flow meter Wiratama

Flow Meter Air Baku PDAM

Flow meter air baku pdam adalah flow meter yang digunakan untuk mengukur debit air dan total volume air baku yang akan di proses guna menghasilkan kwalitas air sesuai standart pdam. Air baku pdam bisanya dimabil dari sungai, bendungan, waduk atau sumur bor dan untuk daerah tertentu mungkin mengambil dari air laut yang di proses menjadi […]

Thermal Mass Compress air and gas flow meters VA500

Flow sensor for compressed air and gas – VA 500 Contrary to the previously used bridge circuit the newly developed evaluation electronics of our flow sensor records all measured values digitally. This leads to a better accuracy also in case of large measuring spans of 1:1000. What are the advantages of our flow measuring technology? […]

Flow meters for compressed air and gas

Fow meters from CS Instruments work according to the calorimetric measuring principle. This means, while measuring the thermal mass flow or standard volume flow, no additional temperature and pressure compensation is necessary. The standard volume is a common volumetric unit used to compare gas quantities at different pressures and temperatures. In order to meet various […]

Batch Controller N series fluidwell

The product group “Batch Controllers” offers multiple batch controllers in the N-Series, F-Series and D-Series product ranges. The batch controllers can be used for accurate dispensing of small amounts of liquids up to the loading of trucks with two-stage control and analog multi-stage control. Specially designed for the delivery of unknown quantities of product is […]

Flow Computers fluidwell

The product group “Flow Computers” offers a unique range of comprehensive solutions to calculate the consumption and net flow at standard conditions or the ratio between two flows. Typical applications are found on board of ships to calculate the fuel consumption, gas flow calculation in power plants and the monitoring of two component blending. The […]

 

Ada yang ingin ditanyakan silahkan

1. Jika ada Pertanyaan tentang Product ataupun harga silahkan langsung hubungi :

2.  Jika ada pertanyaan atau diskusi Tentang tulisan disini silahkan email ke :            admin@rudywinoto.com

  Atau silahkan isi kolom dibawah ini dan klik submit      

  Flowmagflowmasonic          

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: