Float Level Transmitter
For indicating liquid level and alarming to control.
■ Easy to install and is generally used.
■ Able to control motor continuously.
■ Able to control power seperately.
■ Able to use in chemical, industrial waste water, or food tank.
■ Coated sensor with PVC or PTFE is available for chemical tanks.
■ High temperature type or high viscosity type is available by special order.
- It is widely used for ordering, controlling and alarming the liquid level.
- The installation is quick and easy and is the most widely used water level measuring device.
- By coating the sensor with P.V.C or PTFE, it is possible to use in the chemical tanks used for special purposes.
- It is possible to consecutively control the motors as many as wanted
- It is a widely used water level measuring device for sewage and waste water.
Providing electric voltage of DC 24V to the sensor, it makes output of 4~20mA current which is converted by resistors in the sensor.
The continuous fluctuation of the current is caused by the up-and-down movement of the float which has permanent magnet in it. Finally, the current output is transmitted to the controller.
- Supply Voltage : DC 24V
- Output Voltage : DC 4 ~ 20mA
- Max. Temp : MAX 80℃
- Flange : JIS 10K 100A FF
- Material Stem : SUS304
- Material Float : SUS304
- Material Stopper : SUS304
Articles: Rudy flow meter Wiratama
Flow meter air baku pdam adalah flow meter yang digunakan untuk mengukur debit air dan total volume air baku yang akan di proses guna menghasilkan kwalitas air sesuai standart pdam. Air baku pdam bisanya dimabil dari sungai, bendungan, waduk atau sumur bor dan untuk daerah tertentu mungkin mengambil dari air laut yang di proses menjadi […]
Flow sensor for compressed air and gas – VA 500 Contrary to the previously used bridge circuit the newly developed evaluation electronics of our flow sensor records all measured values digitally. This leads to a better accuracy also in case of large measuring spans of 1:1000. What are the advantages of our flow measuring technology? […]
Fow meters from CS Instruments work according to the calorimetric measuring principle. This means, while measuring the thermal mass flow or standard volume flow, no additional temperature and pressure compensation is necessary. The standard volume is a common volumetric unit used to compare gas quantities at different pressures and temperatures. In order to meet various […]
The product group “Batch Controllers” offers multiple batch controllers in the N-Series, F-Series and D-Series product ranges. The batch controllers can be used for accurate dispensing of small amounts of liquids up to the loading of trucks with two-stage control and analog multi-stage control. Specially designed for the delivery of unknown quantities of product is […]
The product group “Flow Computers” offers a unique range of comprehensive solutions to calculate the consumption and net flow at standard conditions or the ratio between two flows. Typical applications are found on board of ships to calculate the fuel consumption, gas flow calculation in power plants and the monitoring of two component blending. The […]